Keyway fear--pictures are a must!
38 posts
• Page 3 of 3 • 1, 2, 3
Master 19
You do not have the required permissions to view the files attached to this post.
Re: Keyway fear--pictures are a must!
Looks like a Ruko. Someone send a lock with this keyway to Xeo to pick! (Then have him send it to me to keep. )
Gordon
Gordon
You do not have the required permissions to view the files attached to this post.
Just when you think you've learned it all, that is when you find you haven't learned anything yet.
Re: Keyway fear--pictures are a must!
Keymark! You've seen this before but the important difference is that the lock is now in my hands. Not so much a keyway as the resulting crack from severe metal fatigue.
More keyway fear. The brass plug is slightly less than 3/8". So far it has spit out every tensioner I have. Should be easy to open...once a tensioner is filed down. I have lost some 0.015" picks to keyways this small.
Thanks to manskirtbrew for the locks.
More keyway fear. The brass plug is slightly less than 3/8". So far it has spit out every tensioner I have. Should be easy to open...once a tensioner is filed down. I have lost some 0.015" picks to keyways this small.
Thanks to manskirtbrew for the locks.
You do not have the required permissions to view the files attached to this post.
Re: Keyway fear--pictures are a must!
That little Wolfdog was a surprising challenge! It was the second lock I ever picked. Have fun with them
Re: Keyway fear--pictures are a must!
Nice locks. Here's some of mine that would definitely drive me mad if I looked at them too long.
A French 6 pin Metalux K6:
A Gege AP3000. The keyway contains a cog wheel that turns in the millings in the key as its inserted:
A Gege pExtra (shoot me now):
Evva GPI:
LOB Tantal (possibly the same as the Granit 2 Gordon shows, but it's recessed behind a drill plate):
And finally .... for now .... not a real crazy keyway, but a demonstration of a buddy's sadistic tendencies in repinning. A 6 pin Yale 870 with a very unfunny bitting:
A French 6 pin Metalux K6:
A Gege AP3000. The keyway contains a cog wheel that turns in the millings in the key as its inserted:
A Gege pExtra (shoot me now):
Evva GPI:
LOB Tantal (possibly the same as the Granit 2 Gordon shows, but it's recessed behind a drill plate):
And finally .... for now .... not a real crazy keyway, but a demonstration of a buddy's sadistic tendencies in repinning. A 6 pin Yale 870 with a very unfunny bitting:
__________________________
MrAnybody's Locks
DISCLAIMER: Reader may posit an understanding of what was written, while this may not coincide with the intended meaning of what is read. Use of brain is required. No purchase necessary. One size fits all, and may contain traces of gibberish.
Re: Keyway fear--pictures are a must!
Dang! Did Selim pin/cut that Yale? And that Gege pExtra keyway - sweet. But that Metalux takes the prize. It would take some time to open that baby. Thanks for sharing, MrA.
Gordon
Gordon
Just when you think you've learned it all, that is when you find you haven't learned anything yet.
Re: Keyway fear--pictures are a must!
I'm on the lookout for an EVVA but I guess I better add Gege and Metalux to the list.
Re: Keyway fear--pictures are a must!
GWiens2001 wrote:Dang! Did Selim pin/cut that Yale? And that Gege pExtra keyway - sweet. But that Metalux takes the prize. It would take some time to open that baby. Thanks for sharing, MrA.
Gordon
Thanks Gordon. Nope, not selim pinning sauce in this one
__________________________
MrAnybody's Locks
DISCLAIMER: Reader may posit an understanding of what was written, while this may not coincide with the intended meaning of what is read. Use of brain is required. No purchase necessary. One size fits all, and may contain traces of gibberish.
38 posts
• Page 3 of 3 • 1, 2, 3
Who is online
Users browsing this forum: Majestic-12 [Bot]