Need help resetting a masterlock620d
7 posts
• Page 1 of 1
I have a masterlock 620d that I need to unlock and reset, for a trip tomorrow. I know last minute wonder you deserve what you get. Can you help. Here is what the combo lock looks like.
Re: Need help resetting a masterlock620d
Sorry this is a bit late and it might not work on masters but the locks look the same as the ones that I have.
To open them, hook your index finger into the shackle then using your thumb and middle finger, pull on the shackle, HARD,
Turn each wheel and if it is like the ones that I have the wheel will stick on the correct number. Do to each wheel.
Once the first are set the shackle will just pop open when the third wheel hits the correct number.
It does not matter which order that wheels are set - start top, start bottom, random.
To be really flash. After you get the feel (correct tension on shackle and feel of the wheels) you can do it behind your back.
Note. I have not tried the Master version of these locks but all other versions I've seen have been cracked using the same method plus they probably all come out of the same factory.
BTW. the factory default is 000
Cheers.
To open them, hook your index finger into the shackle then using your thumb and middle finger, pull on the shackle, HARD,
Turn each wheel and if it is like the ones that I have the wheel will stick on the correct number. Do to each wheel.
Once the first are set the shackle will just pop open when the third wheel hits the correct number.
It does not matter which order that wheels are set - start top, start bottom, random.
To be really flash. After you get the feel (correct tension on shackle and feel of the wheels) you can do it behind your back.
Note. I have not tried the Master version of these locks but all other versions I've seen have been cracked using the same method plus they probably all come out of the same factory.
BTW. the factory default is 000
Cheers.
Clark's Law (Arthur C)
For every expert there is an equal and opposite expert.
For every expert there is an equal and opposite expert.
Re: Need help resetting a masterlock620d
It works on Master locks, too.
Gordon
Gordon
Just when you think you've learned it all, that is when you find you haven't learned anything yet.
Re: Need help resetting a masterlock620d
only 3 wheels?
step 1. sit on couch
step 2. dial numbers for 15 minutes
step 3. lock opens
step 4. write down combination
step 1. sit on couch
step 2. dial numbers for 15 minutes
step 3. lock opens
step 4. write down combination
Re: Need help resetting a masterlock620d
Thanks for the help. I was able to open the lock and reset the code within 'minutes using the method described in the video.
7 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users