.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Im trying to make a 7 or 8 pin tubular pick, is there anyone who has done this, could you post some pics? Does anyone have any pointers. Thanks a lot.

there's a post here on lp101 about some home made ones.

http://www.lockpicking101.com/viewtopic ... 7&start=15

also, there are templates that you can make that will simply help you make your own tubular tension wrench, maybe someone else will post it for you--i don't have a pdf. that's the real skill is using the tubular tension wrench and single pin picking. the tubular picks themselves aren't to easy to make as far as i'm concerned, so i purchased a pro set, and that type of picking doesn't require as much talent.

A little searching on this very site yielded
http://keypicking.com/viewtopic.php?f=58&t=1537

It was an excellent tutorial .

Maybe some one can find a working link

I have uploaded this so this doesn't happen again.



AFAIK this is the original document.

Thank you for posting a working link