ISEO lock help needed.

[Solid]

I've picked up one of my old locks that i haven't yet opened and i'm now devoting my lock time to cracking it. I need some info help really. THIS is the lock. Its an ISEO High safety Boxer padlock fitted with 40mm half euro cylinder. Has anyone got a euro cylinder in its own? To sell or just pictures of it stripped? Also i want some key blanks. I can buy them myself but i'm not sure what blank it is. If someone could supply me a key cut to lowest depths that would be great so i can TRY foil impression it. There are some side pins aswell. The R6 keys don't fit this cylinder by the way. Any info and help greatly recieved.

[Solid]

Thanks for reading guys but i've now cracked the lock.

The lock is just like this but a single euro, even the spool pins are in the exact same place.



Here is the whole lock stripped



Here is the lock body



The pins. Key pins at the bottom, then above the top pins, then the side pins above those. Then the driver pins above the side pins ( notice pins 1,3,4,6 are all spool) the the springs top.



Here is the cylinder hull and plug with cam and circlip



Here is the plug showing the holes for the key pins



Here is the plug showing the top pins



Here is the plug showing the side pins



And finally the keyway

[crazy]

if you can upload the photos to another server. servimg.com is very bad

[aarpazthelockpicker]

wow that looks fun

[crazy]

Great info man thanks