.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Posted: **Sun Jul 24, 2016 6:13 pm**

How do I get this core out. I'm not sure how the control element works.

Posted: **Sun Jul 24, 2016 7:43 pm**

Maybe this helps? The first post at least. I believe only the seventh pin at the very back must be lifted while turning the plug to move the locking pawl.
http://keypicking.com/viewtopic.php?f=95&t=9331&p=84654

Posted: **Sun Jul 24, 2016 8:38 pm**

flywheel wrote:Maybe this helps? The first post at least. I believe only the seventh pin at the very back must be lifted while turning the plug to move the locking pawl.
http://keypicking.com/viewtopic.php?f=95&t=9331&p=84654

Thanks, this helps. I'll have to monkey around with it tomorrow.

Posted: **Mon Jul 25, 2016 10:56 am**

1) Picked to operating
2) Turned core back until almost locked
3) lifted control pin and turn clockwise to Control. This works because the last pin has a much smaller diameter than the standard key pins.

The plug has a notch on it which corresponds to the rotating disk (control lug)

Note the smaller diameter of the control pin

.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Yale Interchangeable Core Help

Yale Interchangeable Core Help

Re: Yale Interchangeable Core Help

Re: Yale Interchangeable Core Help

Re: Yale Interchangeable Core Help