Picked up a cheap set of disk detainer picks
9 posts
• Page 1 of 1
Picked up my first set of disk detainer picks, one for front tensioned locks and one for rear tensioned locks, haven't had had a chance to try them yet, waiting for a cheap disk detainer lock I ordered to arrive, paid about $10 for the pair (Chinese obviously) they had good reviews people just said they need some file work done to them, will update when my lock arrives, never picked a disk detainer before
You do not have the required permissions to view the files attached to this post.
Re: Picked up a cheap set of disk detainer picks
I just ordered that set also...keep us posted , i'm anxious to hear the results.
Thanks Matt
Thanks Matt
xeo: i use an electric buzzer exclusively for my ass that gets sanitized afterwards
PhoneMan: would have freaked my friend out if hed come over
MBI: Most anything goes.
PhoneMan: way to give me nightmares
selim: ok then blow your load,, i'll take anything free now a day's
PhoneMan: would have freaked my friend out if hed come over
MBI: Most anything goes.
PhoneMan: way to give me nightmares
selim: ok then blow your load,, i'll take anything free now a day's
Re: Picked up a cheap set of disk detainer picks
This is the lock I purchased: http://pages.ebay.com/link/?nav=item.vi ... 60&alt=web
It appears to be one of the cheap Chinese locks you can pry the retaining plate off and dump the guts out, not very secure if you ask me haha
It appears to be one of the cheap Chinese locks you can pry the retaining plate off and dump the guts out, not very secure if you ask me haha
Re: Picked up a cheap set of disk detainer picks
I got that set through Dhgate a while back and a lock similar to what twenglish1 posted. My bottom tensioning one was bent and I am not sure if it will be usable and wasn't worth hassling over. The other was fine and I picked the lock with some struggling but filing the tip and smoothing the other surfaces could make a big difference. Overall not too bad a value to get a start on this type of lock.
(18:56:54) HAL 9000 Sez: It isn't so much bait as it is chum
My lock photography: https://flic.kr/s/aHskv3U6Tx
My picking videos:https://www.youtube.com/channel/UCr_YDBWHU0VpoIjmfocIbuw
My lock photography: https://flic.kr/s/aHskv3U6Tx
My picking videos:https://www.youtube.com/channel/UCr_YDBWHU0VpoIjmfocIbuw
Re: Picked up a cheap set of disk detainer picks
My bottom tensioning one also appears slightly bent, I'm amazed it wasn't worse due to the lack of packing material, it was delivered in a plastic bubble wrap envelope, why is filing required? Don't fit the lock well? Or do the rough edges mask feedback?
Re: Picked up a cheap set of disk detainer picks
twenglish 1 wrote:My bottom tensioning one also appears slightly bent, I'm amazed it wasn't worse due to the lack of packing material, it was delivered in a plastic bubble wrap envelope, why is filing required? Don't fit the lock well? Or do the rough edges mask feedback?
The "pick tip" is a bit large. Mines tough to move through the stack with out disturbing disks. I haven't done it yet but Bosnianbill has a video where he shows his finished one on YouTube.
(18:56:54) HAL 9000 Sez: It isn't so much bait as it is chum
My lock photography: https://flic.kr/s/aHskv3U6Tx
My picking videos:https://www.youtube.com/channel/UCr_YDBWHU0VpoIjmfocIbuw
My lock photography: https://flic.kr/s/aHskv3U6Tx
My picking videos:https://www.youtube.com/channel/UCr_YDBWHU0VpoIjmfocIbuw
Re: Picked up a cheap set of disk detainer picks
I watch alot of his videos, I'll have to look for it, that's where I saw him show how you can pry the retaining plate off some of the cheap Chinese locks
Re: Picked up a cheap set of disk detainer picks
For the price the picks are good plus keep in mind they wont get much use. They do require a fair amount of file and sanding to get them to size because the tips are thick enough to grab 2-3 discs at once which isnt what you want.
Re: Picked up a cheap set of disk detainer picks
I watched his videos on them and I'm gonna get to work cleaning them up, I'll post pictures of the finished product
9 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users