.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Posted: **Sun Aug 09, 2015 7:26 am**

jeffmoss26 wrote:As the lock stands now, the control key is 0 bitted with a fixed cut of 7 on the tip.

So my next question is......Do these use standard schlage pins?

Posted: **Sun Aug 09, 2015 7:43 am**

Yes they use standard Schlage pins. They can be master keyed just like a normal Schlage etc.

Posted: **Sun Aug 09, 2015 7:43 am**

selim wrote:I think it's 1 bitted, and what keyway is that ?

It looks.like it.says EF on the blank.

Posted: **Sun Aug 09, 2015 8:47 am**

Pick the lock to operating clockwise, turn the plug to just before the control position and press in and hold the silver small 7th pin in the far back of the lock with your pick. While holding the pin in turn the lock clockwise and it should stop right at control and let you remove the core.

Posted: **Sun Aug 09, 2015 1:25 pm**

Thanks Xeo I will try it. Transmission took a big steaming dump on my crown vic. Dealing with that and hoping I don't snap any exhaust manifold studs.

Posted: **Thu Aug 13, 2015 6:08 am**

Did you get it out?

Posted: **Thu Aug 13, 2015 11:17 am**

I was messing with it last night for a few minutes with no luck. I will keep trying, but I am sending Mossman some locks. I'd atleast like to get it out before that just to do it.

Posted: **Thu Aug 13, 2015 4:46 pm**

Its 0-bitted. You could literally stick a tension wrench and lift up all the pinstacks at once until the plug turns a bit... remove the tensioner and then press in that 7th pin to activate the control mechanism and then turn it until it stops and remove it.

Posted: **Thu Aug 13, 2015 7:24 pm**

The 7th pin feels set when picked. I'm not getting anything when pressing and turning to the 20° area.

Posted: **Fri Aug 14, 2015 10:33 am**

Or I will just remove the core with my EF control blank when you send me the padlock

.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Schlage Kryptonite PL4000 rekey ?

Re: Schlage Kryptonite PL4000 rekey ?

Re: Schlage Kryptonite PL4000 rekey ?

Re: Schlage Kryptonite PL4000 rekey ?

Re: Schlage Kryptonite PL4000 rekey ?

Re: Schlage Kryptonite PL4000 rekey ?

Re: Schlage Kryptonite PL4000 rekey ?

Re: Schlage Kryptonite PL4000 rekey ?

Re: Schlage Kryptonite PL4000 rekey ?

Re: Schlage Kryptonite PL4000 rekey ?

Re: Schlage Kryptonite PL4000 rekey ?