Thu Nov 06, 2014 11:15 am by Doogs
Picked these over the last couple of days:
Ilco mortise with RB keyway from macgng (tricky keyway for me approx 2 hrs), An American A1100 from locksportsupply.com (pure fluke, still working on a legit pick. Gutted it and it has 5 driver spools and 5 serrated kp's),
And a Papaiz (Made in Brazil) that was tossed by a local locksmith that had a broken spring at #1( What a nightmare that was!) I spent probably close to 15 hours on this lock before success. I decided to drill it and gut it for a practice lock and found 5 spools of standard size). Notice I screwed up drilling out #5 (but salvagable) that should teach me to use the drillpress next time.
ETA: the EC75 is also from macgng that's my present work in progress (need to make a better dimple pick for this one , Damn that's a tight keyway). The prybar under the picks is a homebrew copy of a sparrows mic'd at .038 and works well but a little crude.
Last edited by
Doogs on Thu Nov 06, 2014 6:18 pm, edited 1 time in total.
The other, other, other, other Mike
(21:55:20) HAL 9001RC:: Heh heh uh heh uh heh uh uh heh PhoneMan said ass