HELP? abloy protec key won't turn smoothly

[nine4t4]

Not a picking question, but could use ideas.

My employment uses abloy protec, and the exterior front door has become very temperamental. Sometimes it works fine and others it has trouble relocking. The keys aren't worn significantly. I could probably swap the cylinder from another less used lock but I'm trying to find the easiest path. I get the feeling I'm going to have to swap cylinders, but maybe there's a maintenance thing I'm not thinking of.

I'm guessing the locks are at least ten years old. Do they wear out?

Any advice on lubricant? I think someone used silicone or WD40 at some point so graphite is probably a bad idea at this point. Maybe it just needs a flush with cleaner

[6275LA]

I assume that since this is the front door, lots of keys operate it in the course of a week. While each key only operates it a few times per week, if everyone operates it with their own key once a day, then you have lots of times where the cylinder is operated compared to the amount of use each individual key sees. Since the cylinder operates way more often than any one key does, it makes sense that the cylinder will wear out faster than any one key. Even if Abloy cylinders have no springs, the parts do still rub against each other and will wear down with use.

[Visitor]

If wd40 has been used it could now need replacing, wd40 is the destroyer of locks. I would flood it with a ptfe based lubricant (I use gt85) and see if it improves it.
The only real way is to strip it down and service it properly or indeed change the cylinder.
A cylinder change may be cheaper than a locksmith callout for a lockout who will then change the cylinder anyway.

[nine4t4]

I fortunately have the same handles inside as well. Looks like the easiest path is swapping the whole handle since it's not a KIK.

I'll try to flush it, but I have no desire to gut and clean a disk cylinder that is in service. Pin tumblers are one thing, but I can see gutting a protec going VERY PEAR SHAPED. I know I can do it, but Murphy's law is like one of the commandments.

Thanks for the input. I knew what the answer would be, just hoped there was something I might not have thought of