Mon May 30, 2016 2:35 pm by GWiens2001
Patrick Star wrote:How does the rotational part of the ASSA Twin Combi sidebar code work? Unfortunately all my Twin Combi's are in use so I can't disassemble one and find out.
Looking at the key, there isn't anything obviously controlling the rotation in the sidebar code itself. The cuts all seem the same angle etc.
So, what rotates the pins? Are they simply rotated as they pass "up/downhill" over the side cuts?
It has to do with the gravitational pull of Saturn in the month of May, while the house of Libra is in the seventh moon or whatever. Those who delve too deeply into the mysteries of ASSA Twin Combi have been known to be found dressed in a plaid jacket and paisley pants, with a Liverpool jersey while at a Manchester United game. Be warned!

It has to do with where on the ramp the pins sit. If it is on the descending part of the ramp, the pin will be rotated one direction, on the ascending part of the ramp will rotate it the other direction. Not sure, but suspect straight angles are done when the key is just touching the opposite direction of the last angle, so it is nudged straight.
Gordon
Just when you think you've learned it all, that is when you find you haven't learned anything yet.