.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Posted: **Fri Sep 11, 2009 1:21 pm**

Busse Knives...get out your checkbook. They are proud of them. :shock:

http://www.bussecombat.com/home/index.shtml

Posted: **Fri Sep 11, 2009 2:49 pm**

They are proud of them for a reason. If you can manage to break one of those infinisteel fuckers, they'll replace it. Not a manufatoring defects warranty, or a partial cost kind of warranty. Use it to bust up the concrete on your driveway, or chop up a steel pipe, unload a .45 on it, then jam it into a vice and put a 6 foot pipe on the handle and lean on it until it breaks, and you get a new one.

Even so, I never understood the hype until I held and used one. Seriously heavy duty pry bar, that's takes a very sharp edge for such a thick blade grind.

Posted: **Fri Sep 11, 2009 4:05 pm**

ToolyMcgee wrote:They are proud of them for a reason. If you can manage to break one of those infinisteel fuckers, they'll replace it. Not a manufatoring defects warranty, or a partial cost kind of warranty. Use it to bust up the concrete on your driveway, or chop up a steel pipe, unload a .45 on it, then jam it into a vice and put a 6 foot pipe on the handle and lean on it until it breaks, and you get a new one.

Even so, I never understood the hype until I held and used one. Seriously heavy duty pry bar, that's takes a very sharp edge for such a thick blade grind.

Another unsolicited testimonial.

Seriously though, the guys in the blade forum @ AR15.com wet their pretty pink panties at the mere mention of a Busse. I've heard nothing but good things about them and I've seen the video where they stick the blade handle inside a pipe and try to break the SOB.

Some badass, tough knives they make.

Posted: **Fri Sep 11, 2009 6:47 pm**

I was gonna link the one of the battle mistress distruction vids... but it's redundant at this point, right? Instead, look at this crazy color combo for the tank buster. This is another reason people go nuts over them. Limited runs of custom color and design options. To see another knife exactly like the one you ordered, would be very rare. Now, here's the fun, try to find the other gotta have busse design you like from a previous run that matches your other one, and make a custom pair. :shock:

.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Busses not for Pusses

Busses not for Pusses

Re: Busses not for Pusses

Re: Busses not for Pusses

Re: Busses not for Pusses