FAQ  •  Register  •  Login
UKLockpickers.co.uk Lockpicking supplies such as Lockpicks, tools, and more! COMMANDOLOCK.COM Military grade padlock systems lockpickshop.com A source for lockpicking supplies such as lockpicks, locksmith tools, and more!

Busses not for Pusses

<<

HallisChalmers

Lord Emeritus of Keypicking HallisChalmers

Posts: 2070

Joined: Mon Apr 28, 2008 2:46 pm

Location: Hell

Post Fri Sep 11, 2009 1:21 pm

Busses not for Pusses

Busse Knives...get out your checkbook. They are proud of them. :shock:

http://www.bussecombat.com/home/index.shtml
You do not have the required permissions to view the files attached to this post.
<<

ToolyMcgee

User avatar

Active Member

Posts: 585

Joined: Sat Jul 19, 2008 2:27 am

Location: St Louis

Post Fri Sep 11, 2009 2:49 pm

Re: Busses not for Pusses

They are proud of them for a reason. If you can manage to break one of those infinisteel fuckers, they'll replace it. Not a manufatoring defects warranty, or a partial cost kind of warranty. Use it to bust up the concrete on your driveway, or chop up a steel pipe, unload a .45 on it, then jam it into a vice and put a 6 foot pipe on the handle and lean on it until it breaks, and you get a new one.

Even so, I never understood the hype until I held and used one. Seriously heavy duty pry bar, that's takes a very sharp edge for such a thick blade grind.
<<

HallisChalmers

Lord Emeritus of Keypicking HallisChalmers

Posts: 2070

Joined: Mon Apr 28, 2008 2:46 pm

Location: Hell

Post Fri Sep 11, 2009 4:05 pm

Re: Busses not for Pusses

ToolyMcgee wrote:They are proud of them for a reason. If you can manage to break one of those infinisteel fuckers, they'll replace it. Not a manufatoring defects warranty, or a partial cost kind of warranty. Use it to bust up the concrete on your driveway, or chop up a steel pipe, unload a .45 on it, then jam it into a vice and put a 6 foot pipe on the handle and lean on it until it breaks, and you get a new one.

Even so, I never understood the hype until I held and used one. Seriously heavy duty pry bar, that's takes a very sharp edge for such a thick blade grind.



Another unsolicited testimonial.

Seriously though, the guys in the blade forum @ AR15.com wet their pretty pink panties at the mere mention of a Busse. I've heard nothing but good things about them and I've seen the video where they stick the blade handle inside a pipe and try to break the SOB.

Some badass, tough knives they make.
<<

ToolyMcgee

User avatar

Active Member

Posts: 585

Joined: Sat Jul 19, 2008 2:27 am

Location: St Louis

Post Fri Sep 11, 2009 6:47 pm

Re: Busses not for Pusses

I was gonna link the one of the battle mistress distruction vids... but it's redundant at this point, right? Instead, look at this crazy color combo for the tank buster. This is another reason people go nuts over them. Limited runs of custom color and design options. To see another knife exactly like the one you ordered, would be very rare. Now, here's the fun, try to find the other gotta have busse design you like from a previous run that matches your other one, and make a custom pair. :shock:
You do not have the required permissions to view the files attached to this post.

Return to Cold Steel

Who is online

Users browsing this forum: No registered users

Don't forget to visit our sponsors for all of your lockpicking needs!
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Grop
"CA Black" theme designed by stsoftware