Paracord Mini-Billy
Posted: Wed Nov 18, 2009 6:21 pm
Materials needed:
(1) Golf Ball (any brand, but if you insist, use a Titleist)
(20) ft of 0.250 inch, 600lb test polypropylene utility rope
(a) Create a monkey fist around the golf ball using about 14 ft of the rope, leaving equal length tails on either side of the fist; http://www.animatedknots.com/monkeysfist/index.php?LogoImage=LogoGrog.jpg&Website=www.animatedknots.com
(b) Use about 6 ft of the rope to interweave a crown sinnet using both monkey fist tails. http://www.animatedknots.com/crownsinnet/index.php?LogoImage=LogoGrog.jpg&Website=www.animatedknots.com
(c) Tie your knots tight, superglue to ensure they don't come undone, burn ends.
(d) Use as a short sap and practice on your drunk friends, mailman...or better yet, your drunk mailman.
(1) Golf Ball (any brand, but if you insist, use a Titleist)
(20) ft of 0.250 inch, 600lb test polypropylene utility rope
(a) Create a monkey fist around the golf ball using about 14 ft of the rope, leaving equal length tails on either side of the fist; http://www.animatedknots.com/monkeysfist/index.php?LogoImage=LogoGrog.jpg&Website=www.animatedknots.com
(b) Use about 6 ft of the rope to interweave a crown sinnet using both monkey fist tails. http://www.animatedknots.com/crownsinnet/index.php?LogoImage=LogoGrog.jpg&Website=www.animatedknots.com
(c) Tie your knots tight, superglue to ensure they don't come undone, burn ends.
(d) Use as a short sap and practice on your drunk friends, mailman...or better yet, your drunk mailman.