.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Posted: **Tue Aug 15, 2017 10:28 am**

20170815_110928.jpg

Can anyone identify this lock for me? It is on one of the old AT&T Microwave Tower Site Buildings. I need to replace the locks and I am having a hard time getting the correct cylinder. The hole for the cylinder is about 1-1/2" in diameter and I am thinking the length is about 1- 1/8". I will post photos when I find out how to add them to my post.

Posted: **Tue Aug 15, 2017 1:51 pm**

I'm getting a message about "no photos being made public yet". So going on your description only, I would say Corbin masterring.

Posted: **Tue Aug 15, 2017 5:44 pm**

Welcome to the forum. There is a tutorial on how to upload photos here. https://www.keypicking.com/viewtopic.php?f=58&t=6755

Posted: **Tue Aug 15, 2017 9:29 pm**

Thanks RiYame, With you help I got the photos posted. I will do some practice to get them to post better.

Posted: **Tue Aug 15, 2017 10:37 pm**

Could go with a Baldwin Cylinder or Medeco (they both have a 1 1/2" in Diameter Cylinder's) a quick google search found this site
https://www.locksco.com/products/CYLIND ... ?Collapse=

hope that helps some

.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Identification of Mortise Lock

Identification of Mortise Lock

Re: Identification of Mortise Lock

Re: Identification of Mortise Lock

Re: Identification of Mortise Lock

Re: Identification of Mortise Lock