darkhorses vids
Forum rules
Rules!!!!
This section is for lockpicking videos uploaded to YouTube or MetaCafe only
You are more than welcome to post your videos here, but make sure they are all under your own threads - this way it saves space.
Make sure you put the YouTube or MetaCafe link between the tags. Failure to do so will result in your video not displaying correctly.
NOTICE - PLACE ALL YOUR VIDEOS UNDER YOUR OWN THREAD!
Do not scatter your videos all over the forum under various titles and topics, etc.
Start a thread with your name - EX: "Joe Bleauxx's Videos"
Add all your future videos under that same thread, thereafter.
Rules!!!!
This section is for lockpicking videos uploaded to YouTube or MetaCafe only
You are more than welcome to post your videos here, but make sure they are all under your own threads - this way it saves space.
Make sure you put the YouTube or MetaCafe link between the tags. Failure to do so will result in your video not displaying correctly.
NOTICE - PLACE ALL YOUR VIDEOS UNDER YOUR OWN THREAD!
Do not scatter your videos all over the forum under various titles and topics, etc.
Start a thread with your name - EX: "Joe Bleauxx's Videos"
Add all your future videos under that same thread, thereafter.
thanks happykill...I was surprised at how good the feedback was
Re: darkhorses vids
Tri-circle 6 pinner.....cheap £2 padlock that was a pain to pick....The pins get progressively higher towards the back with pin 5 so high it was difficult to get over it without oversetting it and then pin 6 was very deep so 2 picks required to defeat the little fecker...
Contributor - Research & Development Kingpin
Posts: 322
Joined: Sun Aug 15, 2010 6:08 pm
Location: Pennsylvania
Re: darkhorses vids
Great job DarkHorse. Funny how those cheapies can be tough just based on the biting.
Ed
Ed
Re: darkhorses vids
The dreaded 5 pin ruko bites the dust using a pink polka dot pick especially for Orcs amusement...
Re: darkhorses vids
darkhorse wrote:Tri-circle 6 pinner.....cheap £2 padlock that was a pain to pick....The pins get progressively higher towards the back with pin 5 so high it was difficult to get over it without oversetting it and then pin 6 was very deep so 2 picks required to defeat the little fecker...
Nice job, sometimes the cheaper ones are the hardest. Do you have the key for this lock?
Re: darkhorses vids
American lock series 30 from chris......Been at this for ages because of that low pin but today I got the little fecker
Re: darkhorses vids
Tutorial for making homebrew wires to open cabinet/drawer and wardrobe locks
Re: darkhorses vids
ruko 5 pinner with 5 milkchurn type barrel drivers picked quickly and I was more surprised than most at the time
Re: darkhorses vids
tubular pick demo after tweaking it for one of our members at dbc...
Re: darkhorses vids
making a working key for a 6 lever yale safe lock using a L&F blank and thin file ...all by hand...no key cutter
Re: darkhorses vids
patons 5 pin euro...no spools but only needed the slightest of tension to get it..
Contributor - Research & Development Kingpin
Posts: 322
Joined: Sun Aug 15, 2010 6:08 pm
Location: Pennsylvania
Re: darkhorses vids
Great job DH! Can't wait to get my feather tensioner!
Ed
Ed
Who is online
Users browsing this forum: No registered users