FAQ  •  Register  •  Login
UKLockpickers.co.uk Lockpicking supplies such as Lockpicks, tools, and more! COMMANDOLOCK.COM Military grade padlock systems lockpickshop.com A source for lockpicking supplies such as lockpicks, locksmith tools, and more!

Wanted: Your ideas for new tutorials on the forum!

<<

MBI

User avatar

Site Owner

Posts: 1545

Joined: Thu Apr 03, 2008 9:25 pm

Location: Utah, USA

Post Thu Oct 06, 2011 11:18 pm

Wanted: Your ideas for new tutorials on the forum!

Ok boys and girls put your thinking caps on!

There are some great lockpicking forums and resources on the internet, and I think this is among the best of them. There are a lot of fantastic tutorials here made by the users, some with videos, others with great pictures to illustrate what they're doing. I think it’s a better “how-to” resource than most of the paid courses I’ve seen.

Let’s keep the momentum going and further expand the content here!

In this thread, I’d like your ideas for what new tutorials you’d like to see on the forum. If it’s a tutorial you feel qualified to make yourself, that’s excellent. But even if it’s not something you think you can do yourself, please post the idea anyway. Let’s get the idea out there and hopefully someone who DOES have the skill will pick up the ball and run with it. Let’s brainstorm and see what we can come up with.

I don’t want to discourage participation, but to keep things as productive as possible, before posting a new idea, consider using the search feature on the forum and take two or three minutes to do a quick check and see if a tutorial has already been posted which covers your idea. However, due to differences in search terms, etc, I imagine a few ideas will still get posted here which already have tutorials elsewhere on the forum. If you notice such a request and you know where the tutorial is located on this forum, please reply to that post in this thread, quoting their idea and the direct link to that post to help guide that person to it.

I realize there is an entire subforum dedicated to this very subject, the very subforum where I’ve posted this new thread. However, the last post on ANY thread in this section was June 23, 2011, about three and a half months ago. So I thought we needed to breathe some new life into it.

Let’s keep it positive, and keep spreading the knowledge folks!

***Edit***
After mulling over this idea, I think I'm going to put up a prize for the best new tutorial that is made and posted to the forum in response to one of the suggestions posted in this thread. Over the next day or two, I'm going to figure out what I have that might make a half decent prize, and come up with some criteria for determining the winner. I'll post it in another edit to this post in the next couple days once I hash this out in my head.
Last edited by MBI on Fri Oct 07, 2011 10:59 pm, edited 1 time in total.
<<

mister sour

User avatar

I've Been Banned!!
I've Been Banned!!

Posts: 1208

Joined: Thu Mar 10, 2011 11:07 pm

Location: Missouri

Post Thu Oct 06, 2011 11:22 pm

Re: Wanted: Your ideas for new tutorials on the forum!

i would like to see;
tips on making keys for locks with a restricted keyway
auto lockout tips
safe maniulation tips
pin charts-what locks contain what pins and their deminsions
safe deposit locks-how to cut keys, read, pick, etc.
how to impression high security locks (ASSA, Medeco, Mul-T-Lock, etc.)
how to read locks
<<

mdc5150

User avatar

Contributor
Contributor

Posts: 1113

Joined: Mon Jan 24, 2011 10:35 pm

Post Thu Oct 06, 2011 11:29 pm

Re: Wanted: Your ideas for new tutorials on the forum!

I would like to see more automotive. I will pick up where I can but it is not every day I have the time to make a video, and with some of the other people on here like Kokomo and LSA it can be a little humbling to make a how to video. (Not that there are not a lot of other GREAT lock pickers/locksmiths here they just stand out for the video work.)

When I get time I will make a GM 10 cut ignition removal video. But I'd love to see how other locksmiths originate for vehicles like Chrysler and Ford.
<<

whizdumb

User avatar

Active Member

Posts: 393

Joined: Sun Oct 11, 2009 11:28 pm

Location: NJ, USA

Post Fri Oct 07, 2011 8:46 am

Re: Wanted: Your ideas for new tutorials on the forum!

Honestly, (and this is kinda selfless because I understand the problem).. But if someone could do a tutorial about how to recover an American Lock padlock after a faulty 180º rotation or any other common problems associated with those locks... Maybe include cutaway views and the like..

I think it would be a great tutorial for newbies and "point-to" reference. A real definitive guide to the matter may help newbies (and experienced alike) to understand what really going on inside the lock when they think it's completely toast.
Image
Whizdumb81 wrote:You can't handle the DCAP
xe0 wrote:how about a peterson gov steel baseball bat so i can thwap motherfuckers
ecksdee wrote:To learn to pick locks is to learn how to speak a language spoken only in whispers and riddles.

http://www.youtube.com/user/HobbyPicker
<<

uklockpicker

User avatar

The Supply Guy - Honored Benefactor
The Supply Guy - Honored Benefactor

Posts: 1232

Joined: Tue May 27, 2008 1:38 pm

Location: United kindom Uk

Post Sat Oct 08, 2011 9:48 am

Re: Wanted: Your ideas for new tutorials on the forum!

I'd like to see more auto stuff & lock impression high security locks, safes ect :smile:
Image
<<

MBI

User avatar

Site Owner

Posts: 1545

Joined: Thu Apr 03, 2008 9:25 pm

Location: Utah, USA

Post Sun Oct 30, 2011 10:36 pm

Re: Wanted: Your ideas for new tutorials on the forum!

I got a bit distracted during the past couple of weeks with the Department of Transportation doing it's best to make me feel like Arthur Dent , but I'm back with new details for this contest.

The official contest thread is located here:

viewtopic.php?f=113&t=5878

Good luck!
<<

xeo

User avatar

Catministrator
Catministrator

Posts: 2180

Joined: Mon Jul 19, 2010 9:30 pm

Post Mon Oct 31, 2011 11:18 am

Re: Wanted: Your ideas for new tutorials on the forum!

i want a forum/subforum dedicated to hardcore picking techniques. im talking super advanced ninja skills described in outrageously painful detail.
Image
The code is hidden in the tumblers. One position opens the lock, another position opens one of these doors...
http://www.youtube.com/xeotech1

(ノಠ益ಠ)ノ彡┻━┻

░░░░░░░░░░░░░Image
<<

mister sour

User avatar

I've Been Banned!!
I've Been Banned!!

Posts: 1208

Joined: Thu Mar 10, 2011 11:07 pm

Location: Missouri

Post Thu Nov 03, 2011 4:06 pm

Re: Wanted: Your ideas for new tutorials on the forum!

i want to see a section devoted to locks we see in the wild. we might get in trouble for photographing the door lock on kfc but hell, lets see what we can find!!!
<<

the picker

User avatar

Familiar Face

Posts: 233

Joined: Sun Mar 06, 2011 12:58 pm

Location: usa iowa

Post Thu Nov 03, 2011 7:51 pm

Re: Wanted: Your ideas for new tutorials on the forum!

mister sour wrote:i want to see a section devoted to locks we see in the wild. we might get in trouble for photographing the door lock on kfc but hell, lets see what we can find!!!

:agree: that would b awesome because its the first thing i thing i think of any where i go :mrgreen:
<<

The Doctor

User avatar

Newbie

Posts: 7

Joined: Thu Apr 14, 2011 10:06 pm

Location: colorado

Post Thu Nov 03, 2011 11:02 pm

Re: Wanted: Your ideas for new tutorials on the forum!

I would like to see keypad hacking. You know the 1-9 buttons you must press to open the lock? I want to learn how to do that.
<<

NNFAK

User avatar

Contributor
Contributor

Posts: 352

Joined: Fri Sep 16, 2011 1:43 am

Location: Houston

Post Thu Nov 03, 2011 11:26 pm

Re: Wanted: Your ideas for new tutorials on the forum!

mister sour wrote:i want to see a section devoted to locks we see in the wild. we might get in trouble for photographing the door lock on kfc but hell, lets see what we can find!!!


Man that's a good idea! That would be great.
<<

xeo

User avatar

Catministrator
Catministrator

Posts: 2180

Joined: Mon Jul 19, 2010 9:30 pm

Post Fri Nov 04, 2011 6:50 am

Re: Wanted: Your ideas for new tutorials on the forum!

The Doctor wrote:I would like to see keypad hacking. You know the 1-9 buttons you must press to open the lock? I want to learn how to do that.


Keypad hacking involves shorting out or manipulating the electrical components in the door to bypass the electrical locking mechanism controlled by the onboard microprocessor inside the keypad itself. Paperclips work sometimes, but in terms of real "hacking", there's no silver bullet. You might want to start looking into electrical circuits and how they operate and function. What you're essentially doing when hacking a keypad is injecting and/or redirecting voltage which would be normally be controlling the electric motor that controls the bolt in the door. For example, a wire may contain zero volts DC when the door is locked. On a correct keypad entry, 5 volts is sent to a motor to retract a bolt. If you shorted out the circuit or even injected voltage direclty into the line, you could unlock the door. This is given you can remove the housing on the keypad. In a situation like a garage door, you'd most likely need to supply a constant power signal to raise a garage door as the power is sent to a motor in the garage which would need to remain constant to fully lift the door. Not exactly a realistic way to enter discreetly, but fun if you're learning. I guess a real application of this would be if you knew beforehand the make and model keypad. You could buy one, figure out how to bypsass it, and then you'd gain access by taking a 9V battery, a few wires, and maybe a project enclosure... some alligator clips ... make yourself a nice device... and you could walk up to the keypad, remove the housing, target the wiring, and gain access quickly. You would of course probably destroy the keypad in the process as you'd need to cut wires.
Image
The code is hidden in the tumblers. One position opens the lock, another position opens one of these doors...
http://www.youtube.com/xeotech1

(ノಠ益ಠ)ノ彡┻━┻

░░░░░░░░░░░░░Image
<<

jeffmoss26

User avatar

Sargent Mossberg
Sargent Mossberg

Posts: 2163

Joined: Sun Apr 18, 2010 8:21 pm

Location: Cleveland, OH

Post Fri Nov 04, 2011 11:54 am

Re: Wanted: Your ideas for new tutorials on the forum!

I would like to see some info on SFIC...how to setup and pin them.
femurat: They're called restricted for a reason...
Innerpicked: The more keys you carry, the more important you look
GWiens2001: Great video! Learned a lot about what fun can be had with a forklift and a chainsaw.
pmaxey83: but i first have to submit the proper forms for a new hobby to my wife
<<

rai

Contributor
Contributor

Posts: 561

Joined: Thu Sep 20, 2012 9:52 am

Location: minneapolis

Post Mon Oct 08, 2012 9:55 am

Re: Wanted: Your ideas for new tutorials on the forum!

EASIEST PICK TO DIY

The snapper,

Heres a tutorial on how to make your own snapper with my recent improvements from a bike spoke.

get a bike spoke, the normal full size bike has spokes that are just the right length.

1. make a bend and inch from the nailhead/90 degree bend end of the bike spoke, its easy to do with a smooth jaw small plier,

bend the nail head so that it 90 degree bend closes the one inch rectangle, this means you have to think a little bit, when you make the first bend,

You should end up with an almost closed shape I will call a thin rectangle but of course all the corners are rounded so lets not get anal about terminology

2 You will now want to put a bend that leaves the 'rectangle' at 90 degrees to the rest of the spoke, here again you need to think and consider do you want the rectangle, now refered to as the TRAP to be located to the left or right of that piece of straight spoke, if you put it to the right, that will make your tool what I call 'righthanded' meaning that trap is on the right of the spoke,
You might get it wrong, but thats ok, this is only your first snapper, you are gonna do it again when you really like them. you learn by mistakes

3. now its time to put on the thumb spinner/trigger. this will save your hand from some pain. this is not on any of the internet snapper you may have seen. Use a piece of bic stic pen, this type of plastic will wear well and not fracture from use. also a short piece of metal tube could be used but the bic stic plastic will be quieter.
this spinner will try to fall into the way as you go on to "step 4 winding the coil" so it must be secured near the trap with a rubber band. so it does not repeatedly interfere as you are winding the coil.

4. winding the coil, I use a 'rosary pliers' this has two conical jaws for chain bending, they are nearly unknown in hardware stores, but available at jewelers jobbers one of which can be found on the internet at a company called "rio grande alburqurque"
I hope they have rosary pliers in their tool catalogue, I haven't looked in many years.
the length of the tool will be established by the length between the trap and the coil, a couple inches at best, a longer one will have less striking power. Short hits harder. you will be making a few so you will see how that works.

Think.. then wind the coil around a small mandrell ( bolt or whatever you have) but the coils I wind have an interior diameter that I will estimate are about a quarter inch, not that big loopy thing seen on internet videos.
you will want to wind it so that the thickening of the tool is on the side where the trap also thickens the tool. Hope you can see what I mean. your almost done..

for a first snapper one loop will do, later you can try two turns on the loop, heres the think before doing part, you already have the trap on one side of the bike spoke, that is the side that you should wind the coil to put its width on, you do not want the coil to have its width on the opposite side, why, because I say so, it would screw the asthetics of my design. also might be problems I don't know about because I don't make them any other way.

the two tangent arms coming out of this coil should be at about 30 to 45 degres angle and this angle affects the power of the tool
but it is also an issue in loading the needle arm into the trap so it might not be possible to make that angler greater without actually reseting it while lifting it into the trap under coil resistance. Youll see what I mean.

5. look at the length of the needle arm of the spoke, you will see from where the trap is which part is going to be in between the coil and the trap, and the excess that sticks forward of the trap is the part you will have to grind, file and sand to make the needle.
it can be ground and filed after putting it in the trap, but its easier to do it outside the trap,
dont make the needle longer than a six pin full size key because excess length will make it harder to use.
at the 6 pin keyblade length, grip the needle stock in any plier with the jaw over the five and six pin area, then bend the outer excess length upward, and cut the excess off just in the middle of that bend.

6 final steps are thinning the needle, you can initially use a grinder if you have a skill at it, be sure to quench often, you do not want to cause uneven temper in the metal by overheating.
If you are not skilled at grinding just go straight to the file, its too easy to overdo and cut to deep with a powertool.
grind a little bit off one side of the needle from root to tip not the other way around because that technique will overthin the tip,
then quench again
and grind the same amount off the other side, and repeat is small steps, do not try to bring it to final shape with the grinder, the powertool is only for mass wasting and speeds up the job, so haste will make waste,
final shaping is done with a file, with the needle held in a groove in a block of wood held firmly in a vise or a bench pin if you know what that is. the groove can be made with a hacksaw blade and should be shallow enough to expose the metal above the groove.
with the file you will rough form a very small picktip hook or halfdiamond at the tip of the needle using just a smal part of that bend you put there most of that remaining bend will be filed off
when you think you are almost there, use 220 grit sandpaper wrapped on a thin stick and rubberbanded on both ends,
220 grit is aggressive and will still be shaping the tool so use it to round the edges as well as take out the marks of the file,
inspect the result and if you are satisfied move on to 320 grit to take out the rough marks of 220 grit,

then fold a small piece of 320 grit over the needle and push and pull the needle through this so the marks are parallel to the needle, remove all the marks and then if you like you can do this again with smaler grits.

the final adjustments are to make the ergo banananomic shape which will be done by hand to eliminate the possibiltiy of tool marks on the spoke,
then set the needle in the trap and permanently close the trap, put some thin metal inside the trap to keep it at the width of the wire spoke and crush the trap so that its interior dimension is close to the width of the wire but not thinner, a cheap stainless butterknife is handy for this

if you made it right handed, the spinner should be the only thing that hangs off the left side of it, your right thumb is amazingly on the left of that hand. the trap and coil will be on the right.
if your left handed as usual think backwards. :hbg:

some final tweeks are to use needle files to reduce the nail head so it dosent interfere with the thumb spinner

you can increase the power some by bending the lower (needle) arm of the snapper by hand between the coil and the trap while the tool is complete and the needle is in the trap, this has the effect of spreading the effective angle of the two arms.


THERE YOU HAVE IT. A TUTORIAL THE EASIEST LOCPICK EVER.
<<

clearmoon247

User avatar

Familiar Face

Posts: 110

Joined: Sat May 12, 2012 10:09 am

Location: Orlando, FL

Post Mon Oct 08, 2012 10:56 am

Re: Wanted: Your ideas for new tutorials on the forum!

Wow rai, thats pretty impressive to say the very least. Personally, i would love to see tutorials on speed picking, e.g. for locksport and tutorials for insane bitting, e.g. pinned to MAC. Another good thing that would be helpful around here would be tutorials on simple and advance locksmithing techniques, e.g. disassembly of locks, how to repin locks, master key escalation, proper technique for broken tool removal, even lock installation and the such. Im working on ways to contribute for DIY tutorials and have a few irons in the fire, so to speak, so, look out for those as they come in.
Next

Return to What Would You Like To See?

Who is online

Users browsing this forum: No registered users

Don't forget to visit our sponsors for all of your lockpicking needs!
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Grop
"CA Black" theme designed by stsoftware