.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Hey guys,

Broke my BiLock's warding today. The key still works, but it's now looking bad, and I can't tension the lock properly now.
It's a BiLock FG QCC that you can see here: http://imgur.com/a/TJ5m9#50.

Now it looks like this:




Does anyone have this spare part?? I really want to have my lock complete again...

Revenge of the BiLock.

Gordon

He prefered to break, than to bend to my ruling.
I gotta give him that!


But I will pick this bastard, with or without warding!

Try making a tensioner that fits into the faceplate. Start square, as wide as both keyways combined, then file it into two parts, one for each side of they keyway. That way, when you get another faceplate (after your facepalm), it will fit that, too. The outside of both sides will still tension the lock just fine, and it would not have applied tension to the center part that broke. If you make it with two arms instead of the normal one, then it will also apply tension evenly to the plug, making picking a little easier. One side will still bind first, but it won't wedge it over.

Gordon

Lol, you and the rest of the planet mate! You were trying to pick it, weren't you?

This is how I tension mine, it requires no 'tooth' pressure:



Regarding picking it...it took me AGES to get mine. Have you got the key? There are only 4 cut heights but if you are unlucky enough to have a deep 4 cut behind a shallow 0 cut (like me) then I could not get the high one without disturbing the low one in front. I did not have a pick that would do it. In the end I had to re-shape a gonzo hook and come at the deep one from the middle of the keyway. A real PITA.

Hahahahahahaha

Yeah, I'll give a go at such tool, thanks!



Me?? Naaaah

I like how you do it, but I don't have magnets with the perfect width for it. I'll sure try it when I get some.


On picking it, yes I do have a deep cut like that, I'll have to see how I can get to it