.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Posted: **Wed Nov 03, 2021 10:51 pm**

Does anybody have or know how to get a plastic tray insert for a Lab .003 pin kit. Getting a the metal box I just need the plastic insert that holds the pins.
Matt

Posted: **Wed Nov 03, 2021 11:48 pm**

Have you tried contacting LAB to see if they would sell you one?

Posted: **Thu Nov 04, 2021 11:24 am**

Riyame wrote:Have you tried contacting LAB to see if they would sell you one?

Yes I did Riyame. Have not heard back yet.

Posted: **Fri Nov 05, 2021 12:50 pm**

I tried to get one from Lab a while back and they said the only thing you could do was buy a Lab pin case like this. Plastic inserts were not available

https://www.southord.com/products/lab-pin-case

Posted: **Fri Nov 05, 2021 4:40 pm**

kenneth_v wrote:I tried to get one from Lab a while back and they said the only thing you could do was buy a Lab pin case like this. Plastic inserts were not available

https://www.southord.com/products/lab-pin-case

Thank you for the response kenneth_v. I got the kit today and the pics were lousy. The liner is ok, so a replacement is not needed. Also, Lab told me they are not available.

Posted: **Mon Nov 08, 2021 2:54 pm**

You could always 3D print trays as an option, or make a small vacuum mold cheaply from some mdf and a household vacuum to pull in some thin plastic, if dont have these items lots of schools librarys and makers spaces have equiptment

.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

.003 pin kit insert

.003 pin kit insert

Re: .003 pin kit insert

Re: .003 pin kit insert

Re: .003 pin kit insert

Re: .003 pin kit insert

Re: .003 pin kit insert