.003 pin kit insert

Wed Nov 03, 2021 10:51 pm by just1pick+open

Does anybody have or know how to get a plastic tray insert for a Lab .003 pin kit. Getting a the metal box I just need the plastic insert that holds the pins.
Matt

Wed Nov 03, 2021 11:48 pm by Riyame

Have you tried contacting LAB to see if they would sell you one?

Thu Nov 04, 2021 11:24 am by just1pick+open

Riyame wrote:Have you tried contacting LAB to see if they would sell you one?

Yes I did Riyame. Have not heard back yet.

Fri Nov 05, 2021 12:50 pm by kenneth_v

I tried to get one from Lab a while back and they said the only thing you could do was buy a Lab pin case like this. Plastic inserts were not available

https://www.southord.com/products/lab-pin-case

Fri Nov 05, 2021 4:40 pm by just1pick+open

kenneth_v wrote:I tried to get one from Lab a while back and they said the only thing you could do was buy a Lab pin case like this. Plastic inserts were not available

https://www.southord.com/products/lab-pin-case

Thank you for the response kenneth_v. I got the kit today and the pics were lousy. The liner is ok, so a replacement is not needed. Also, Lab told me they are not available.

Website · Mon Nov 08, 2021 2:54 pm by MrPharmer2012

You could always 3D print trays as an option, or make a small vacuum mold cheaply from some mdf and a household vacuum to pull in some thin plastic, if dont have these items lots of schools librarys and makers spaces have equiptment

.003 pin kit insert

.003 pin kit insert

Re: .003 pin kit insert

Re: .003 pin kit insert

Re: .003 pin kit insert

Re: .003 pin kit insert

Re: .003 pin kit insert

Who is online