Page 1 of 1

Ingersoll 700series key blanks wanted

PostPosted: Wed Dec 09, 2020 3:46 pm
by ponsaloti
Hi, I'm a locksmith in the UK and I have a few cs712 ingersoll padlocks, all new and unused with codes on the boxes.
I have been told these use Q section blanks that were made for the North American market. Not available in the UK.
Can anyone shed any light on these.
Thanks
Mario

Re: Ingersoll 700series key blanks wanted

PostPosted: Wed Dec 09, 2020 6:44 pm
by MHM
You wouldn't be trying to sell a lock to a guy by the name of B*** S****** by any chance? There's a very similar question being asked elsewhere at the moment as well.

Re: Ingersoll 700series key blanks wanted

PostPosted: Thu Dec 10, 2020 4:07 am
by ponsaloti
Hi, I dont recognise that name although I am selling on ebay so maybe he's someone who's asking me questions about them.

Re: Ingersoll 700series key blanks wanted

PostPosted: Tue Dec 15, 2020 9:52 am
by 10ringo10
Hi can you upload photo of keyway Q SECTION padlock will take a look - 7 years later still have them lol
I don't log in much on the trade forum s/repairer in uk - 2013 last time you asked I believe but no luck
cheers

ringo

Re: Ingersoll 700series key blanks wanted

PostPosted: Wed Dec 16, 2020 4:16 pm
by ponsaloti
20201211_103333.jpg
20201211_103333.jpg

This is not the correct key but it does go into the keyway.

Re: Ingersoll 700series key blanks wanted

PostPosted: Thu Dec 17, 2020 7:08 am
by 10ringo10
This may help - sks as them in stock currently available - worth a shot looks close
see topic Ingersoll key codes on here - we managed to produce a cut card for the blitz in 2013
They are pickable - 10 levers 5 each side - :longhook: to work on

Re: Ingersoll 700series key blanks wanted

PostPosted: Thu Dec 17, 2020 8:20 am
by ponsaloti
Have plenty of those.
As said, I've been told it's a Q section by ingersoll , although they may be speaking with fork tongue.

Re: Ingersoll 700series key blanks wanted

PostPosted: Fri Dec 18, 2020 3:39 am
by Visitor
I don't remember a Q section but that may be because they aren't for the UK?
Sks usually are the ones to help, I even got restricted M blanks from them once but only because they had got a load in for a rekey job at Sandringham Palace.
However sks have seriously gone down hill recently especially since Tracy started gobbing off down the phone so I've moved all business to duffells who aren't as good on keys.

To be honest that keyway doesn't look anything special, it's been a while since I did any Ingersoll but I would guess an S? But that's only a guess, it must be 15 years since I did any. If you have blanks that fit properly use them, the wrong blanks on an unworn ingersol keyway don't fit well if at all.

The 10 lever is still one of my favorite locks.

Re: Ingersoll 700series key blanks wanted

PostPosted: Fri Dec 18, 2020 8:31 am
by ponsaloti
20201218_141600.jpg
20201218_141650.jpg
I agree, it doesn't look anything special but it is.
It's not an S.
S is on the left and centre. The key that goes in is on the right. Look at bottom right, the centre spine is very sharp.
Best way to study profiles of blanks and keys is to look at the flutes as they disappear into the Bow.

Re: Ingersoll 700series key blanks wanted

PostPosted: Mon Dec 28, 2020 8:39 am
by Visitor
Sorry ikept meaning to post this, these are the sks blanks,

Re: Ingersoll 700series key blanks wanted

PostPosted: Tue Dec 29, 2020 5:18 pm
by ponsaloti
if you look at my key board, you will see I have all off these hanging on the hooks.
Thanks for everyone's input.
All padlocks have been sold (without blanks).

Re: Ingersoll 700series key blanks wanted

PostPosted: Wed Jun 08, 2022 12:59 pm
by jason+macaw
ponsaloti wrote:
20201218_141600.jpg
20201218_141650.jpg
I agree, it doesn't look anything special but it is.
It's not an S.
S is on the left and centre. The key that goes in is on the right. Look at bottom right, the centre spine is very sharp.
Best way to study profiles of blanks and keys is to look at the flutes as they disappear into the Bow.


hi can you get hold of the q section key blanks many thanks