Page 1 of 1

SOLD: ASSA Twin pro mortise cylinder

PostPosted: Sun Aug 19, 2018 1:48 pm
by supallama
For sale, ASSA Twin pro mortise cylinder, no key.

$20 USD plus shipping (Tracked packet is ~15 usd anywhere in america)

Image

Re: For sale: ASSA Twin pro mortise cylinder

PostPosted: Mon Aug 20, 2018 11:20 am
by Patrick Star
Is it guttable without the key?

Re: For sale: ASSA Twin pro mortise cylinder

PostPosted: Mon Aug 20, 2018 4:40 pm
by supallama
Patrick Star wrote:Is it guttable without the key?


yes, pull the top cap, or pick the top and pull the plug forward, be ready for the fingerpins to come out though. might be able to machine a key of some sort to prevent the pins from flying out...

Re: For sale: ASSA Twin pro mortise cylinder

PostPosted: Fri Aug 24, 2018 1:00 am
by Patrick Star
Ah, right - not possible to reassemble it without something key-like since the sidebar pins won't stay in place...
Kinda lowers the value, but not to zero :)

Are you interested in some trade? If my memory isn't entirely wrong, last time we traded you only got the Combi, right?
Lots of other fun ASSA (and non-ASSA) locks available if you don't have them in your collection already!

Re: For sale: ASSA Twin pro mortise cylinder

PostPosted: Wed Aug 29, 2018 6:07 am
by supallama
Patrick Star wrote:Ah, right - not possible to reassemble it without something key-like since the sidebar pins won't stay in place...
Kinda lowers the value, but not to zero :)

Are you interested in some trade? If my memory isn't entirely wrong, last time we traded you only got the Combi, right?
Lots of other fun ASSA (and non-ASSA) locks available if you don't have them in your collection already!



No worries, I was actually about to mark this one as sold XD

I do have a keyed mortise i can trade you after it has been picked :) id be looking for an assa DP4400 off the top of my head, not sure what else you can get there heh.

Re: For sale: ASSA Twin pro mortise cylinder

PostPosted: Thu Aug 30, 2018 5:16 am
by Patrick Star
DP is only sold in stores in Denmark, not Sweden :(
It's called Ruko Garant+ there.

Have you picked the Twin Combi 5600 yet, by the way? Lots of fun, though the Primus tool won't work (atleast if yours have the same side bitting as mine).

Re: For sale: ASSA Twin pro mortise cylinder

PostPosted: Thu Aug 30, 2018 5:40 am
by supallama
The one you sent me is purely collection :D I do however have a spare that ive been picking now and then with no luck. gonna need a different tool design im thinking... Been putting too much time in to the protec lately... almost done it though so thats a plus :D

Re: SOLD: ASSA Twin pro mortise cylinder

PostPosted: Thu Aug 30, 2018 10:34 am
by Patrick Star
You're gonna need something that basically looks like the Primus tool but with a longer "flag".

I just filed down a big half diamond until it fit the profile and wasn't too wide. Maybe with some bittings you need more precision than that, but I can set pins where two adjacent cuts are rotated towards each other, even with this coarse version.