Selling new U-Change rim/mortise cylinders and keys

[Riyame]

Alright, I have a bunch of new U-Change mortises to sell along with keys.

They are new but the boxes vary in condition and some may be a bit rougher do to shipping. Each will include 2 factory keys that have tarnish from storage. All keys are cut the same. There are a few each of rim and mortise cylinders.

The cost is $30 each plus shipping. Several can fit into a box. I also have some extra keys that I will sell for $2.50 a piece. A couple keys can be safely shipped in a few sheets of paper in an envelope for $1.

Shipping will be from the USA in a small flat rate box. Cost to USA is $7.

Funds are quoted in USD. Payment will be accepted by Paypal.

[mdc5150]

Not to be a dick but that is a rim cylinder.

But U-Change locks are a fun pick. I have serviced these in the field and they are not all that bad to repair once you've done it a couple times. Much easier than a KW Smartkey.

[GWiens2001]

Can't tell from the angle. There could be threads to do both mortise and rim. But you have younger eyes than I do.

Gordon

[mdc5150]

Can't tell from the angle. There could be threads to do both mortise and rim. But you have younger eyes than I do.

Gordon

I don't know about younger eyes, you looked to be in your thirties and I am slightly past that.

It looks like it is just a brushed finish except the top. And I didn't see any cams to operate as a mortise in the hardware pack.

[GWiens2001]

Can't tell from the angle. There could be threads to do both mortise and rim. But you have younger eyes than I do.

Gordon

I don't know about younger eyes, you looked to be in your thirties and I am slightly past that.

It looks like it is just a brushed finish except the top. And I didn't see any cams to operate as a mortise in the hardware pack.

Add at least a decade.

Gordon

[Riyame]

You might be right. I thought they were mortises but it has been at least a year since I have seen them so I sent keymaster a PM to ask.

[Lauren]

Didn't that guy Lauren invent a bypass tool for those locks?

[Riyame]

Didn't that guy Lauren invent a bypass tool for those locks?

I do believe he may have

[GWiens2001]

Didn't that guy Lauren invent a bypass tool for those locks?

I do believe he may have

And I made a set based on the plans posted by the outstanding Lauren.

Gordon

[femurat]

But now the images of the bypass tool are gone, so how can I make one too?

[jharveee]

https://youtu.be/T_ZdAkjShwE
The dimension and instruction are still in the original post.
Bosnianbill's video has a couple close-ups around 2:19.
LockPickShop.com sells the bypass kit.
The only place I have seen these locks are at my local mall.
They look very interesting.

[Riyame]

Ok, post updated. There are a number of rim and mortise cylinders. If you want one over the other let me know.

[femurat]

Thanks for the link and info jharveee. With all these info I can make it
I've seen the video and discovered that the bypass doesn't reset the lock. I can easily pick it and want to reset it to the new key I'll get from Riyame, so I'll just pick it and rotate it 90 degrees CW, insert a tension wrench handle into the change hole, insert the new key, remove the tension wrench and rotate it back to remove the key. Here are the instructions I found. Sorry Riyame for derailing your thread.

Cheers

[femurat]

So I purchased this key to REKEY my lock to its bittings. I was going to pick the lock open, insert the rekey tool and set it to the new the key.
Yesterday evening I got the key and just to prove that the key didn't work, I tried it. To my surprise the lock opened. Less work to do I guess.
I wonder how many chances I had to get a matching key, considering I got this lock some time ago from another member.

Thanks

[Riyame]

So I purchased this key to REKEY my lock to its bittings. I was going to pick the lock open, insert the rekey tool and set it to the new the key.
Yesterday evening I got the key and just to prove that the key didn't work, I tried it. To my surprise the lock opened. Less work to do I guess.
I wonder how many chances I had to get a matching key, considering I got this lock some time ago from another member.

Thanks

LOL

You are the second person that has bought one of the keys and had it work. My keys must be magic