My Tool Collection
6 posts
• Page 1 of 1
Im posting this here, because I know I have atleast one tool you may not have seen before.
I'll Start it off with the Peterson SFIC Drill Jig. I've never successfully used it
Second up, is my HPC Door and Nose Puller which can TRIPLE as a padlock plug puller!
Here is my LAB Medeco Biaxial Key and Pin Decoder along with some A1 Key decoders
Here is my favorite pick, my Peterso Pro1 Tubular Lock Pick
And for after I pick and decode the tubular lock, My A1 Herty Gerty Hand-Held Tubular Key Cutter
Here is my A1 Pak A Punch, which I have never used. I NEED THE KWIKSET AND SCHLAGE DIES!
Here are my Brockhage Mica Door Shims. Very Nice tools to slip the latch on doors and windows
Here is my Keedex k-18 Safe Change Key Tool. Very cool to me.
Peterson Plug Spinner, which is twisted from heavy use
Here is my newest favorite tool. Its a HPC D-Code-A-Key. You insert the key in the bottom, after inserting the correct card up top, and it'll show you each cut depth as you move the key in. Also, It shows angles on Medeco Classic keys!
Re: My Tool Collection
Very Nice. Have you tried the Peterson SFIC drill jig? or just haven't had the need yet?
(20:10:59) Blacky: oki
(20:18:08) MBI: Me working for the CIA is about as likely as you working in the Middle East.
(20:19:01) Riyame: lol
(20:19:05) Riyame: he is in dubai
(20:19:26) MBI rescinds his previous comment
(20:18:08) MBI: Me working for the CIA is about as likely as you working in the Middle East.
(20:19:01) Riyame: lol
(20:19:05) Riyame: he is in dubai
(20:19:26) MBI rescinds his previous comment
Re: My Tool Collection
Here is my Kwikset Drill Jig. Kinda cool. I use it every once in a while. It's never failed to impress the customers and get the job done
Diabolical Pinning Master & Lock Philanthropist
Posts: 410
Joined: Tue Jun 10, 2008 6:31 pm
Location: Maine
Re: My Tool Collection
Nice stuff sour,
now all you need is a jig to drill threw bolt's in a 161 prep. -
i have one of those hpc decode a akey and will sell it
now all you need is a jig to drill threw bolt's in a 161 prep. -
i have one of those hpc decode a akey and will sell it
Re: My Tool Collection
selim wrote:Nice stuff sour,
now all you need is a jig to drill threw bolt's in a 161 prep. -
i have one of those hpc decode a akey and will sell it
somebody better pounce on this or i will have myself a back up d code a key
Re: My Tool Collection
you should buy it sour, you're missing card number 10 in your set.
(20:10:59) Blacky: oki
(20:18:08) MBI: Me working for the CIA is about as likely as you working in the Middle East.
(20:19:01) Riyame: lol
(20:19:05) Riyame: he is in dubai
(20:19:26) MBI rescinds his previous comment
(20:18:08) MBI: Me working for the CIA is about as likely as you working in the Middle East.
(20:19:01) Riyame: lol
(20:19:05) Riyame: he is in dubai
(20:19:26) MBI rescinds his previous comment
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users