FAQ  •  My feedback  •  Feedback
UKLockpickers.co.uk Lockpicking supplies such as Lockpicks, tools, and more! COMMANDOLOCK.COM Military grade padlock systems lockpickshop.com A source for lockpicking supplies such as lockpicks, locksmith tools, and more!

Is this a Lever Lock Pick?

<<

Marduk28

User avatar

Contributor
Contributor

Posts: 257

Joined: Thu Dec 27, 2012 5:35 pm

Location: Taiwan and California

Post Sat Feb 28, 2015 6:17 am

Is this a Lever Lock Pick?

Hey guys,

Here is a link to a tool I saw recently. Does it pick lever locks? Do you think it would work well?

http://www.banggood.com/Treasury-Duplex ... 54401.html


I am looking to try and learn to pick lever locks~ any good starting tools / resources you recommend?

Thanks!
<<

Neilau

User avatar

Active Member

Posts: 740

Joined: Wed May 15, 2013 4:29 am

Location: Australia

Post Sat Feb 28, 2015 8:36 am

Re: Is this a Lever Lock Pick?

They are called Hobbs tools.

It will pick some lever locks. It depends on the thickness of the levers. A complete set of these tools have different thickness lifters (?), generally .9, 1.0 1.1 mm. there are other thicknesses.

The best place to look are the European locksmith suppliers like; Wendt and Multi-pickService. They have catalogues that you can download.

To start out, get some inexpensive lever locks and bend some wire. You tube is a good place to get an idea about what you will be doing.

Cheers.
Clark's Law (Arthur C)

For every expert there is an equal and opposite expert.
<<

houdini1

User avatar

Familiar Face

Posts: 52

Joined: Tue Nov 27, 2012 6:55 pm

Location: England

Post Sat Feb 28, 2015 1:28 pm

Re: Is this a Lever Lock Pick?

They are only for cheaper type mortice
Locks for better quality mortice locks
With Barrel and curtains you need a curtain pick
Which is most common in ik
<<

Marduk28

User avatar

Contributor
Contributor

Posts: 257

Joined: Thu Dec 27, 2012 5:35 pm

Location: Taiwan and California

Post Sat Feb 28, 2015 2:21 pm

Re: Is this a Lever Lock Pick?

Thanks guys!

Just wanted to check to see if it could be useful in some way, but it sounds like I should start with wire and then pick up some higher quality tools.
<<

10ringo10

User avatar

Prolific Poster

Posts: 1112

Joined: Fri May 14, 2010 5:45 pm

Location: EUROPE

Post Sat Feb 28, 2015 2:54 pm

Re: Is this a Lever Lock Pick?

good price - looks like a pipe - barrel lever lock pick many lever lock picks required and years of training to open them
<<

Papa Gleb

User avatar

Contributor
Contributor

Posts: 1088

Joined: Fri Sep 05, 2014 5:10 pm

Location: Brooklyn, NY

Post Sat Feb 28, 2015 10:32 pm

Re: Is this a Lever Lock Pick?

Hey Marduk, I too just go into lever locks so I you find any picks, videos or anything related please do post them and Ill do the same.

The gents are right, get yourself some cheap lever locks (not antique preferably as it would be a sham to take a part a nice antique locks unless its broken) and take it apart to see the internals. OR you can just check out Lauren's thread here and on the other site. He has plenty of high quality pictures of the internals.

Just check that link, wow the tool looks very well machined but that may be just for the picture. It may open locks but depends on which lever locks you are talking about (time era) and as the boys already said the size of the tool is also critical
<<

Marduk28

User avatar

Contributor
Contributor

Posts: 257

Joined: Thu Dec 27, 2012 5:35 pm

Location: Taiwan and California

Post Sun Mar 01, 2015 5:45 am

Re: Is this a Lever Lock Pick?

Sure thing Papa Gleb! I got a long way to go though! haha~

I watched around a dozen you-tube videos so I got a good idea how things work, but I am just lacking some hands on experience. I got see if I can pick up some beginner materials for a good price.

In Taiwan there are a decent amount of Lever Locks in use~ that's what got me thinking about how they might be picked. It's interesting that you never see them in the USA~ I wonder why that is?

How many different style "tension tools" are there for lever locks? I am confused if there is a universal tool or you need a bunch of different kinds for different lock brands.
<<

ratlock

User avatar

Familiar Face

Posts: 187

Joined: Sat May 07, 2016 8:41 am

Location: Scotland

Post Sat Aug 27, 2016 10:30 pm

Re: Is this a Lever Lock Pick?

Hi. Yes its for lever locks, Its generic name is a 2 in 1 pick. The end peice tensions the bolt, whilst the thinner part closer to the user lifts the levers. They can be used on a range of non curtain locks, however. It isnt a one size fits all. They may have to be ground to suit the lock you need to open.
<<

Patrick Star

User avatar

Familiar Face

Posts: 196

Joined: Sun Apr 10, 2016 9:40 pm

Location: Sweden

Post Sun Aug 28, 2016 10:04 am

Re: Is this a Lever Lock Pick?

This is the tool in viewtopic.php?p=107770#p107770
So yes, it works for some subset of lever locks, and you get 2 tools (different lengths seem to be the only difference?) so you can grind one down for locks where the standard size is too big.
In case it's not obvious from the "work of art" my "camera" produced, it's meant for the kind of lock with a pin in the middle and a hollow key (correct name escapes me). I think you could file down the tensioning part and use it with some other locks as well.

This is the annoying thing with lever locks - if you want to use anything fancier than wires, you need lock-specific (or atleast family-specific) tools. On the plus side, they are often much lower precision than eg. disc locks so you can often get away with using cheap and/or quick-and-dirty tools.
<<

huxleypig

User avatar

The Prestigious and Powerful Porcine Prelate

Posts: 884

Joined: Wed Jul 14, 2010 10:59 am

Location: West Mids, UK

Post Sun Aug 28, 2016 10:39 am

Re: Is this a Lever Lock Pick?

Or even something like this: :razz:

<<

10ringo10

User avatar

Prolific Poster

Posts: 1112

Joined: Fri May 14, 2010 5:45 pm

Location: EUROPE

Post Sun Aug 28, 2016 8:28 pm

Re: Is this a Lever Lock Pick?

Wish I had the patience to make such a tool hp - Maybe one day love seeing your inventions ... :razz:
<<

NKT

Newbie

Posts: 6

Joined: Wed Apr 23, 2014 8:01 pm

Location: UK

Post Sat Apr 22, 2017 1:32 pm

Re: Is this a Lever Lock Pick?

From what I know, that's not a 2-in-1, because it is for a post lever lock, not a pin key lever lock, which makes it a Hobbes pick.
They are made large and require a lot of filing down to size for the target lock. I've spent over an hour on some jobs making the tool fit the lock.
Badly made ones frequently bend too, and the more metal you've removed the weaker it is.

I suggest getting some lever locks then making our sourcing tools that will fit - you may never find a lock that fits that specific pick.

Return to Uncommon Tools!

Who is online

Users browsing this forum: CommonCrawl [Bot]

Don't forget to visit our sponsors for all of your lockpicking needs!
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Grop
"CA Black" theme designed by stsoftware