.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Posted: **Tue Oct 27, 2009 1:28 pm**

This looks similar to something that I got in my Klom set. What is this used for? Restricted keyways to get at tricky pins? Or is that for a particular kind of lock? Thanks :mrgreen:

Posted: **Tue Oct 27, 2009 7:43 pm**

Riff wrote:This looks similar to something that I got in my Klom set. What is this used for? Restricted keyways to get at tricky pins? Or is that for a particular kind of lock? Thanks

Riff ..... MTL = Mul-T-Lock =)

Posted: **Tue Feb 08, 2011 1:34 am**

HiNtZ wrote:I would get the butt of key and about 4mm of the actual flat key part and drill a hole through it to guide your tool. You could also make measuring marks for the pin distances

really a nice technique - thanks for sharing

Posted: **Thu Mar 24, 2011 1:28 pm**

Nicely done mate! Homebrew is always the most satisfying aint it?

.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

my MTL pick

Re: my MTL pick

Re: my MTL pick

Re: my MTL pick

Re: my MTL pick