HomeMade LockPicking Station
Posted: Sat May 26, 2012 6:14 pm
Hi guys.
It's not really a tool, but I made this station to hold my locks because I don't have a vise to hold them.
It's just nailed and glued together from some old offcuts of MDF board.
It has holes to hold the lock in both orientations with tensioning screws to hold the cylinders in place. as well as a strip of plastic from an old juice bottle to hold the padlock.
And of course, it's clamped to the desk. It is very firm and secure, there is no play in any areas.
pretty basic I know, but I thought I'd share.
It's not really a tool, but I made this station to hold my locks because I don't have a vise to hold them.
It's just nailed and glued together from some old offcuts of MDF board.
It has holes to hold the lock in both orientations with tensioning screws to hold the cylinders in place. as well as a strip of plastic from an old juice bottle to hold the padlock.
And of course, it's clamped to the desk. It is very firm and secure, there is no play in any areas.
pretty basic I know, but I thought I'd share.