Page 1 of 1
Custom Lock Holder/PinningTray
Posted:
Sun Mar 11, 2012 1:32 pmby gnarus8429
I built this setup for myself but, I got about 40 of the panavise mounts for free and thought that I would give selling them a go. Let me know know what you think. If you like a custom setup let me know and if I can I'll do it. The pinning tray is custom laser cut so any changes that you would like there let me know. Any thoughts would be great!
http://www.ebay.com/itm/110840063788?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649#ht_500wt_1413
Re: Custom Lock Holder/PinningTray
Posted:
Sun Mar 11, 2012 3:12 pmby MBI
I like it. I think I'd like to order one, but I'll have to think about the pinning tray if it's something that can be customized. I'd want it a bit bigger but I'll have to think through exactly how I want it.
Re: Custom Lock Holder/PinningTray
Posted:
Sun Mar 11, 2012 3:19 pmby ChemicalRobot
That is so cool!! I'd buy one in an instant if the tray had larger spaces for the pin-stacks and if the board didn't have the viles/hex-wrench cutout slots.
Re: Custom Lock Holder/PinningTray
Posted:
Sun Mar 11, 2012 5:54 pmby piotr
I like it too! I'll PM you my address so that you can get me a quote on shipping.
Re: Custom Lock Holder/PinningTray
Posted:
Mon Mar 12, 2012 3:23 amby Tarquin
Wow, that's pretty cool. I'm kind of diggin' that.
Re: Custom Lock Holder/PinningTray
Posted:
Mon Mar 12, 2012 10:43 amby jeffmoss26
YES! Put me down for one too but I don't need the vials...
Re: Custom Lock Holder/PinningTray
Posted:
Tue Mar 13, 2012 6:05 pmby Oldfast
Looks very nice. I hope you do well with em' and continue to make more. Keep up the good work!
Re: Custom Lock Holder/PinningTray
Posted:
Wed Mar 14, 2012 7:43 amby Warder
Looks very nice. I hope you do well with em' and continue to make more. Keep up the good work!
Re: Custom Lock Holder/PinningTray
Posted:
Wed Mar 14, 2012 9:25 amby magician59
Very nice! You may find you'll need to buy a whole lot more pan-a-vise mounts, before it's all over.
Re: Custom Lock Holder/PinningTray
Posted:
Sun Mar 18, 2012 3:27 pmby gnarus8429
This a a final version that I did for Jmoss. The vials were removed and a second pinning tray added. After reading the thread on the new pinning mat design for sparrows I will be doing a tray the has three slots for each pin stack and do a total of 7 pin stacks instead of six. I'll post them when I get them cut.
Re: Custom Lock Holder/PinningTray
Posted:
Sun Mar 18, 2012 6:32 pmby mastersmith
Yet another manufacturer that listens to us, this is becoming epidemic! Very nice work. I can't wait to see the version 3.
Re: Custom Lock Holder/PinningTray
Posted:
Sun Mar 18, 2012 6:48 pmby jeffmoss26
Very excited!!
Re: Custom Lock Holder/PinningTray
Posted:
Sun Mar 18, 2012 10:08 pmby MBI
gnarus8429 wrote:This a a final version that I did for Jmoss. The vials were removed and a second pinning tray added. After reading the thread on the new pinning mat design for sparrows I will be doing a tray the has three slots for each pin stack and do a total of 7 pin stacks instead of six. I'll post them when I get them cut.
I like it! Please keep us updated when the new version is ready.