.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

So this is what I am going to be adding to the Oldfast pass along. I am posting a bunch of pics so I didn't want to hijack that thread.

I went to Lowes today and picked up a cheap screwdriver $ .88, a bar of allthread $1.06, and used tools for the rest.

I started by grinding a sharp point on the screwdriver then heat treating it instead of using a file then put it in a vise and secured it and put my pins in a Dremel.




Then I countermilled the plug.



Then I countermilled the cylinder.



Made the caps out of a bar of allthread with a dremel making a slot on the top for a screwdriver.



And this is the finished product.



The lock still functions with the key smoothly. After I countermilled the plug it made it a great deal harder to pick. I have not tried picking since I countermilled the cylinder.

That looks...evil.

I like your allthread idea, what size is that?

6-32

Thankya sir. I like the screwdriver idea too, if I ever get any better with security pins I'll have to try that as well.

That is awesome! I hope that’s in the box when my turn comes up.

Awesome work

Sweet!

Very nice! Aedelas, didn't you see my post about the 6/32 set screws? Let me know if you want a bag of 100 and I'll hook you up next time I order!

I did, but at the time I wasn't thinking about modding locks like this. Also I have a few pieces of allthread at work that I thought may be the right size. And I'd need to order a tap, all of mine are far to big.

I'll take a bag if you order again Jeff, just lemme know. Thankya.

In the meantime though I have some screws at work I might try to cut down.

Hell yeah... looks great!! I've never dealt with counter-milling before... so it'll be all new to me.

Looks like it'll be a real pain... ...which usually equals pleasure Thanks so much for sharing Matt.

I've just picked this lock. It's not impossible but it is a wicked challenge. I hope it will be a challenge as it goes down the line. It had a false set that went almost to 10 o'clock.

Good Lord!! ............

viewtopic.php?f=64&t=5863

The MMf industries bag has arrived and been dealt with... onto the hurd padlock and then it will be on its way.
whos next in line so i can get into contact with them?

And Mdchirchill, that kw lock looks mouth watering. Too bad i was first on the list, I was already jumping up and down for joy as it was tho :'P

I am next on the list as far as I know. Maybe the mortise cylinder will make it's way over to you after the pass around. Maybe the last person on the list can pass it along.

Also I got rid of the caps and made some out of brass. I remembered afterwards that steel and brass make for dielectric corrosion.

how did you achieve the counter milling in the plug?i have wanted to try it but i don't know where to start.

p.s wicked good job on the lock.