Custom Bogota Set

[gnarus8429]

These are some bogota picks that I did recently. I wanted an additional tensioner that was more traditional and a hook in a compact kit. The head on the traditional tensioner is stepped for various key ways and is thus a bit longer. The material is street sweeper bristle (new not used) and they took about three hours to make. The peak to peak measurement on the bogota is 7mm.

http://s1167.photobucket.com/albums/q624/gnarus8429/?action=view&current=DSC_0008.jpg

http://s1167.photobucket.com/albums/q624/gnarus8429/?action=view&current=DSC_0007.jpg

[femurat]

Well done! I see you use power tools, maybe a dremel, so the picks are well shaped and sanded. I like them. The only improvement I can suggest for your next set is to straighten the shafts with a flat file before sanding them. It's very difficult to make a straight line with a rotating disk.

Cheers

[gnarus8429]

Your right. I cut the shape with a dremel and then sand. I should have hand filed the edge flat before the sanding. Thanks for the suggestion.

[darkhorse]

wonderful homebrew....nice one