Page 1 of 1
repinable brinks padlock
Posted:
Sat Jun 11, 2011 7:57 pm
by the picker
i thought it would b neat to repin one so i had a go at it.drilled out the bible plugs and made a cover i replaced the space for the plugs with roller bearings. didn't think it had any but i found 2
in there but im not sure witch position i dropped it after i drilled it.sorry for the crappy pics
Re: repinable brinks padlock
Posted:
Sat Jun 11, 2011 8:19 pm
by KokomoLock
Cool!!! Good thinking on the cover, now you can just slide it off and rekey as needed for picking practice!!!
Re: repinable brinks padlock
Posted:
Sat Jun 11, 2011 9:44 pm
by happykill
excellent Idea!
Re: repinable brinks padlock
Posted:
Sat Jun 11, 2011 11:07 pm
by piotr
Excellent. Can you offer some tips on locating the brass pins/plugs that hold the pins in so you know exactly where to drill?
Re: repinable brinks padlock
Posted:
Sun Jun 12, 2011 8:15 am
by macgng
i had on of those brinks! nice job, looks cool
Re: repinable brinks padlock
Posted:
Sun Jun 12, 2011 9:22 am
by the picker
thanks everyone and to piotr i sanded down the pin side of the lock so i could jest see the plugs then i took a center punch and lightly tappet them in so it leaves a nice little circle to drill on