BOGATA HANDLES
Posted: Sat Apr 04, 2009 4:42 pm
here is how i apply my handles,the second step in making these rakes.
the first step is creating the core.
i documented the first step already.
here are the premade Tri-peak cores, with the wiper insert handles and 3 layers of dual-wall heatshrink
(this means there is a layer of hot glue inside the black tubing)
here we see the sweeper bristle handles,
glued under the first layer of heatshrink.
Time for oatmeal..
layer one.
layer two
last layer, ready to trim the shrink tubing,and final sanding
the first step is creating the core.
i documented the first step already.
here are the premade Tri-peak cores, with the wiper insert handles and 3 layers of dual-wall heatshrink
(this means there is a layer of hot glue inside the black tubing)
here we see the sweeper bristle handles,
glued under the first layer of heatshrink.
Time for oatmeal..
layer one.
layer two
last layer, ready to trim the shrink tubing,and final sanding