.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Posted: **Thu Dec 03, 2015 7:35 pm**

I'm not sure if this is the right place to post this but thought you guys might like to see my first attempt at vacuum forming.
Someones got to find a lock related application for this:)

Posted: **Thu Dec 03, 2015 9:12 pm**

The first vacuum forming I did was trying to get a better fit of a leather holster I was making for a handgun. It worked well. Too well. Way too f###ing well. Had to cut apart the leather to get the handgun out.

After that, I formed the leather by hand, as I used to do.

Gordon

Posted: **Fri Dec 04, 2015 12:59 am**

with a little trimming you have a custom dust cover

Posted: **Fri Dec 04, 2015 5:38 pm**

GWiens2001 wrote:The first vacuum forming I did was trying to get a better fit of a leather holster I was making for a handgun. It worked well. Too well. Way too f###ing well. Had to cut apart the leather to get the handgun out. After that, I formed the leather by hand, as I used to do.

Gordon

It happens:)
This one required some leverage to remove!

Posted: **Fri Dec 04, 2015 5:39 pm**

Anarchy_won wrote:with a little trimming you have a custom dust cover

Not a bad idea!
Just need to make a removal lanyard so its not so hard to remove.

.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Vacuum forming

Vacuum forming

Re: Vacuum forming

Re: Vacuum forming

Re: Vacuum forming

Re: Vacuum forming