FAQ  •  Register  •  Login
UKLockpickers.co.uk Lockpicking supplies such as Lockpicks, tools, and more! COMMANDOLOCK.COM Military grade padlock systems lockpickshop.com A source for lockpicking supplies such as lockpicks, locksmith tools, and more!

Your Bump Key Attempts

<<

Site Admin

Post Wed Mar 26, 2008 9:27 pm

Your Bump Key Attempts

let's see your home brew bump key attempts, if their a complete success or about as good as a glass hammer, we want to see them :D
<<

Josh

Prolific Poster

Posts: 803

Joined: Tue Mar 25, 2008 12:24 pm

Location: Stockton, CA

Post Thu Mar 27, 2008 12:12 am

Re: Your Bump Key Attempts

<<

WOT

Familiar Face

Posts: 20

Joined: Sat Apr 19, 2008 9:51 am

Location: USA

Post Sun Apr 20, 2008 11:19 pm

Re: Your Bump Key Attempts

Image

Manually made with a P-X23MC cutter and the first cut from shoulder is is skewed towards the tip by 0.1 to 0.15" from the factory spec 0.231, which has the same effect as filing down the shoulder
<<

Josh

Prolific Poster

Posts: 803

Joined: Tue Mar 25, 2008 12:24 pm

Location: Stockton, CA

Post Fri Apr 25, 2008 5:25 pm

Re: Your Bump Key Attempts

usmcboltaction wrote:Hey Josh, I made a tension wrench like the one in your pics last night. It works great! I am kinda pissed at myself for not thinkin of something like that.
yeah it really saves your fingers... and it fits every type of keyblank... its awesome :D
haha and it took me a whole 7 seconds to think it up. :lol:
<<

adamd

Familiar Face

Posts: 28

Joined: Tue Apr 22, 2008 4:59 am

Post Fri May 02, 2008 11:21 am

Re: Your Bump Key Attempts

1st attempt and it works(2 spool drivers) :o

Image
<<

Site Admin

Post Fri May 02, 2008 2:26 pm

Re: Your Bump Key Attempts

very nice attempt, what lock you using with it?
<<

adamd

Familiar Face

Posts: 28

Joined: Tue Apr 22, 2008 4:59 am

Post Fri May 02, 2008 3:11 pm

Re: Your Bump Key Attempts

Its for a Yale Cylinder (2 spool drivers). Gonna try and make one for my Abus 85/70 if i can find out pin spacing dimensions :)
<<

Site Admin

Post Fri May 02, 2008 3:20 pm

Re: Your Bump Key Attempts

sounds great, josh has a link here somewhere on where to find spacings. i'm sure you'll get it worked out.
<<

Josh

Prolific Poster

Posts: 803

Joined: Tue Mar 25, 2008 12:24 pm

Location: Stockton, CA

Post Fri May 02, 2008 5:51 pm

Re: Your Bump Key Attempts

well the site i guess was taken down, or at least one of them was... but here is a pdf printout made by ezpicker over at ezp... he was smart enough to print it before the site closed...

--edit---
i guess it didnt attach, so here is the link
<<

Site Admin

Post Fri May 02, 2008 6:05 pm

Re: Your Bump Key Attempts

yeah it dosent accept PDF, if any of you want to upload a raw PDF then put it in a zip folder.

Edit: .PDF is now enabled, you no longer have to put it in a zip folder, you may upload the raw file.

Lew
<<

Josh

Prolific Poster

Posts: 803

Joined: Tue Mar 25, 2008 12:24 pm

Location: Stockton, CA

Post Fri May 02, 2008 6:25 pm

Re: Your Bump Key Attempts

oh well. its not that important... the link works...
<<

adamd

Familiar Face

Posts: 28

Joined: Tue Apr 22, 2008 4:59 am

Post Sat May 03, 2008 1:56 am

Re: Your Bump Key Attempts

Thanks for that Josh :)
<<

adamd

Familiar Face

Posts: 28

Joined: Tue Apr 22, 2008 4:59 am

Post Sat May 03, 2008 3:38 am

Re: Your Bump Key Attempts

I checked out that pdf but it doesn't have Abus on the list, I noticed that the average center to center dimensions are 0.156" is this dimension a safe bet to go for or are the center to center dimensions more critical from lock to lock for bump keys?

Edit: I've had a think about it and that question sounds stupid :oops: What I think I'm trying to say is: Is there any +/- tolerance when making bump keys. I hope thats a bit clearer :)
<<

Josh

Prolific Poster

Posts: 803

Joined: Tue Mar 25, 2008 12:24 pm

Location: Stockton, CA

Post Sat May 03, 2008 12:50 pm

Re: Your Bump Key Attempts

here are a few abus sheets
You do not have the required permissions to view the files attached to this post.
<<

adamd

Familiar Face

Posts: 28

Joined: Tue Apr 22, 2008 4:59 am

Post Sat May 03, 2008 1:15 pm

Re: Your Bump Key Attempts

Ta Josh :)
Next

Return to Bump Keys

Who is online

Users browsing this forum: No registered users

Don't forget to visit our sponsors for all of your lockpicking needs!
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Grop
"CA Black" theme designed by stsoftware