.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Posted: **Wed Mar 26, 2008 9:27 pm**

let's see your home brew bump key attempts, if their a complete success or about as good as a glass hammer, we want to see them

Posted: **Thu Mar 27, 2008 12:12 am**

well here are a few of mine.

oh and here are a few other links to the other files i have in my album...
http://i62.photobucket.com/albums/h109/ ... 7_1835.jpg
http://i62.photobucket.com/albums/h109/ ... 7_1838.jpg
http://i62.photobucket.com/albums/h109/ ... 7_1841.jpg
http://i62.photobucket.com/albums/h109/ ... 7_1842.jpg

Posted: **Sun Apr 20, 2008 11:19 pm**

Manually made with a P-X23MC cutter and the first cut from shoulder is is skewed towards the tip by 0.1 to 0.15" from the factory spec 0.231, which has the same effect as filing down the shoulder

Posted: **Fri Apr 25, 2008 5:25 pm**

usmcboltaction wrote:Hey Josh, I made a tension wrench like the one in your pics last night. It works great! I am kinda pissed at myself for not thinkin of something like that.

yeah it really saves your fingers... and it fits every type of keyblank... its awesome

haha and it took me a whole 7 seconds to think it up. :lol:

Posted: **Fri May 02, 2008 11:21 am**

1st attempt and it works(2 spool drivers)

Posted: **Fri May 02, 2008 2:26 pm**

very nice attempt, what lock you using with it?

Posted: **Fri May 02, 2008 3:11 pm**

Its for a Yale Cylinder (2 spool drivers). Gonna try and make one for my Abus 85/70 if i can find out pin spacing dimensions

Posted: **Fri May 02, 2008 3:20 pm**

sounds great, josh has a link here somewhere on where to find spacings. i'm sure you'll get it worked out.

Posted: **Fri May 02, 2008 5:51 pm**

well the site i guess was taken down, or at least one of them was... but here is a pdf printout made by ezpicker over at ezp... he was smart enough to print it before the site closed...

--edit---
i guess it didnt attach, so here is the link

Posted: **Fri May 02, 2008 6:05 pm**

yeah it dosent accept PDF, if any of you want to upload a raw PDF then put it in a zip folder.

Edit: .PDF is now enabled, you no longer have to put it in a zip folder, you may upload the raw file.

Lew

Posted: **Fri May 02, 2008 6:25 pm**

oh well. its not that important... the link works...

Posted: **Sat May 03, 2008 1:56 am**

Thanks for that Josh

Posted: **Sat May 03, 2008 3:38 am**

I checked out that pdf but it doesn't have Abus on the list, I noticed that the average center to center dimensions are 0.156" is this dimension a safe bet to go for or are the center to center dimensions more critical from lock to lock for bump keys?

Edit: I've had a think about it and that question sounds stupid :oops:

What I think I'm trying to say is: Is there any +/- tolerance when making bump keys. I hope thats a bit clearer

Posted: **Sat May 03, 2008 12:50 pm**

here are a few abus sheets

Posted: **Sat May 03, 2008 1:15 pm**

Ta Josh

.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Your Bump Key Attempts

Your Bump Key Attempts

Re: Your Bump Key Attempts

Re: Your Bump Key Attempts

Re: Your Bump Key Attempts

Re: Your Bump Key Attempts

Re: Your Bump Key Attempts

Re: Your Bump Key Attempts

Re: Your Bump Key Attempts

Re: Your Bump Key Attempts

Re: Your Bump Key Attempts

Re: Your Bump Key Attempts

Re: Your Bump Key Attempts

Re: Your Bump Key Attempts

Re: Your Bump Key Attempts

Re: Your Bump Key Attempts