.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Hi, I was wondering if anyone had any experience with Peterson's Push wire set for the bypass of Adams Rite type swing bolts. These are the curved wires, not the straight ones for a euro style thumbturn. Thanks.

Matt i was just thinking the same thing. I received three of them in the mail today from the over the weekend Peterson sale. I hope someone comes by and sheds some light. I was only able to order the red, blue, and purple ones as the other two were out of stock. I'll keep my eye on this thread, and if i come up with a video or something i will share it. Rob

I have the complete set. I have yet been able to fish one of them thru the keyway and have it come out between the plate and bible and have it come anywhere near the sliding pin. After a week of frustration I emailed Ken Peterson and sent him a picture of my setup. This was his reply;

"From the left, thru the keyway, the center bar, and above the red dot (he painted a red dot on the pic I sent him), force the brass pin down."

I understand the theory and how it works, I just can't figure out how to get to that point.