FAQ  •  My feedback  •  Feedback
UKLockpickers.co.uk Lockpicking supplies such as Lockpicks, tools, and more! COMMANDOLOCK.COM Military grade padlock systems lockpickshop.com A source for lockpicking supplies such as lockpicks, locksmith tools, and more!

American Lock 1100 can't bypass

<<

glockaxis

Newbie

Posts: 2

Joined: Sat Aug 04, 2018 10:30 pm

Post Thu Aug 16, 2018 6:58 pm

American Lock 1100 can't bypass

Hello!

I have a couple 1100s that I'm attempting to bypass with a Peterson bypass tool and it's just not working. I've already checked for the wafers and there are none. Since these are newer locks, have they redesigned the locks to have more metal so a bypass took can't get into the cam and rotate open? If so, is there still a way to bypass it?
Thanks!
<<

jharveee

Prolific Poster

Posts: 845

Joined: Thu Aug 22, 2013 3:14 pm

Location: San Marcos, Ca.

Post Fri Aug 17, 2018 10:12 am

Re: American Lock 1100 can't bypass

Try some lube. You can also file the tip of the tool lightly. Work the tool in carefully. Try it a few times with the cylinder out of the lock to see how the tool works.
<<

glockaxis

Newbie

Posts: 2

Joined: Sat Aug 04, 2018 10:30 pm

Post Sat Aug 18, 2018 5:47 am

Re: American Lock 1100 can't bypass

Thanks for the suggestions. I have taken it apart and I was correctly fitting it in, however, the tool could not pry itself in between the two areas. Lube and filing the flag will probably be my best bet.

Return to Bypassing

Who is online

Users browsing this forum: CommonCrawl [Bot]

Don't forget to visit our sponsors for all of your lockpicking needs!
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Grop
"CA Black" theme designed by stsoftware