Page 1 of 1

Bumping a Schlage Everest

PostPosted: Thu Mar 06, 2014 12:38 am
by overWeight
I recently picked up a Schlage Everest. I received 3 keys with it, and figured I could turn one of them into a bump key, if that is possible. I know there is a regional coding on the side key, but I assume that it would work like a normal bump key, as long as you have the correct regional coding (or is that just for the Primus?). Does anyone have any experience with this, or has anyone tried this before? Would the bump key damage the side pin of the Everest lock? Any input would be appreciated.

Re: Bumping a Schlage Everest

PostPosted: Thu Mar 06, 2014 1:46 am
by jharveee
Yes, Schlage Everest bump keys work. I have three of them, one is a C123 cant remember the others off the top of my head. C145 and c125 are the others.
Got them at Lockpicks.Com.

Re: Bumping a Schlage Everest

PostPosted: Thu Mar 06, 2014 2:48 am
by piotr
jharveee wrote:Yes, Schlage Everest bump keys work. I have three of them, one is a C123 cant remember the others off the top of my head. C145 and c125 are the others.
Got them at Lockpicks.Com.


Don't forget our sponsors! :) You can also get Everest bump keys from http://www.bumpmylock.com/

Re: Bumping a Schlage Everest

PostPosted: Thu Mar 06, 2014 3:03 am
by overWeight
Ah, yes, I guess I could have checked there first. Looks like they have Primus bump keys as well.

Re: Bumping a Schlage Everest

PostPosted: Fri Mar 07, 2014 11:13 am
by Jowens90
yup, just to echo everyone else, i have a set of everest keys as well, and they do seem to work just as well as any other key.