FAQ  •  My feedback  •  Feedback
UKLockpickers.co.uk Lockpicking supplies such as Lockpicks, tools, and more! COMMANDOLOCK.COM Military grade padlock systems lockpickshop.com A source for lockpicking supplies such as lockpicks, locksmith tools, and more!

More Toys from Snowyboy!

<<

GWiens2001

User avatar

Lock-Goblin-Gordon
Lock-Goblin-Gordon

Posts: 3699

Joined: Fri Oct 26, 2012 3:05 am

Location: Arizona, United States

Post Sat Nov 23, 2013 12:56 pm

More Toys from Snowyboy!

Three more locks of Snowyboy Goodness!

Received a few more locks that Snowyboy made! His work is downright amazing.

First, the family shot:

Image

Top one is an elzett X-11 from our Hungarion friend. Then, sent out to the United Kingdom
so Snowyboy could work his magic.

The X-11 key and lock face:

Image

Profile view of the six primary pin channels cutaway…

Image

Unfortunately my phone’s camera is not the greatest. Maybe will try with another camera soon. but here you see the pins in resting position. Part of the plug is milled away so you can see the key pins, but a lip is kept in place to keep the pins in correct alignment.

Image

With the key inserted, you can see the pins lined up at the sheer line. The first pins are hardened steel for drill resistance. (You had better not get caught drilling my cutaways!!!) :evil: The last three primary driver pins are spooled.

Image

Key slightly turned to show the key pins. Yes, the lock is upside down in some of these pictures, but that was the only way to get the light correct for the shot.

Image

But there are still five more pins - two profile pins and three top pins opposite the six primary pins. Being Snowyboy, of course he has cut away the other side of the lock so those can be seen, too. 8)

Image

Back to the ‘front’ of the lock, here the key is turned to show the two profile pins:

Image

And the three passive pins opposite the six primary pins…

Image

And to the back of the lock to show the primary key pins seen through the other cuts:

Image

The two profile pins:

Image

And the three passive pins…

Image

And before we move on to the next cutaway, a note on the five passive pins. They are spring loaded! :shock: :shock: :shock: The ends of them fit together with one side like a cap that reaches almost all the to the end of the other side, with a spring inside If you have seen the write-ups of the U-Change lock, you can get some idea of what I mean.

Next up, an Emhart cam lock. :mrgreen:

Image

Without the keys, you can see the pins not rotated correctly or lined up. Notice that at rest the driver pin and key pin are locked together, so this lock can not be bumped.

Image

The next shots are very hard to take with my phone. Will see about using another camera later.

Here, the key is fully inserted, and the pins are aligned at the shear line and rotated correctly to line up with the groove cut into the plug.

Image

Here the key is turned slightly so you can see the tops of the key pins and the part that interlocks with the driver pins:

Image

And the angle changed so you can see the bottoms of the driver pins and the groove/channel the goes around the plug, allowing for rotation/ The tops of the key pins are too bright in this picture to make out very well, hence the previous picture.

Image

And last (just to make Jeff wait :twisted: ), but not least, a Sargent LFIC with both keys. Just a note - got this LFIC from Jeff!

Image

Side view showing all the pins:

Image

The change (operating) key inserted, the operating pins all line up at the sheer line.

Image

And turned with the change key..

Image

Now the control key inserted. Note that the two middle pins are the only pins used for control with a Sargent LFIC, while the first two and last two pins are unchanged. There are a number of LFIC cores that work this way. Best SFIC cores do not work this way.

Image

And the control key turned to retract the control lug (the brass section in the middle), allowing the core to be removed.

Image

Hope you like them!

Gordon
Last edited by GWiens2001 on Sat Nov 23, 2013 2:59 pm, edited 1 time in total.
Just when you think you've learned it all, that is when you find you haven't learned anything yet.
<<

Riyame

Keeper of the Bests / Supreme Overlord of Small Format Interchangeable Picking Nightmares

Posts: 2096

Joined: Sun Jul 24, 2011 5:16 pm

Location: Canada

Post Sat Nov 23, 2013 1:24 pm

Re: More Toys from Snowyboy!

Very nice. I have been wanting to get Snowyboy to do a few items for me but deciding what to get and getting some of those items is a real pain :/

~Spreads more drool absorbent around this thread~
PhoneMan: I always knew I'd say something stupid and it would be someone's sig
macgng: i am an equal opportunity pervert
macgng: aww fuck thats goin in someone sig :-(

If life gives you melons, you might be dyslexic.
<<

Presumedsublime

Familiar Face

Posts: 36

Joined: Thu Mar 07, 2013 11:04 pm

Location: St. Paul, MN

Post Sat Nov 23, 2013 2:48 pm

Re: More Toys from Snowyboy!

Those are beautiful! Starting a cutaway collection is on my to do list.
<<

PhoneMan

User avatar

I've gone and said something stupid, haven't I?
I've gone and said something stupid, haven't I?

Posts: 377

Joined: Tue Mar 01, 2011 2:05 pm

Location: Missouri

Post Sat Nov 23, 2013 9:04 pm

Re: More Toys from Snowyboy!

Very cool! The only cut aways I have were done by me using my dremel, not nearly as nice as these!
<<

macgng

User avatar

Contributor / I Fought Tooth and Nail to Acquire BO...
Contributor / I Fought Tooth and Nail to Acquire BO...

Posts: 986

Joined: Sun Jan 23, 2011 3:38 am

Location: MD, USA

Post Sat Nov 23, 2013 10:51 pm

Re: More Toys from Snowyboy!

very nice cutaways!!! thanks for posting.
Nibbler: The poop-eradication is but one aspect of your importance.
<<

mech

User avatar

Familiar Face

Posts: 231

Joined: Sun Jun 12, 2011 2:16 pm

Location: United Kingdom

Post Sat Nov 23, 2013 11:49 pm

Re: More Toys from Snowyboy!

i can vouch for hintz's cutaways guys a pro with the mill! top guy to trade with too.
http://www.youtube.com/duction
www.Lockpick.co
<<

GWiens2001

User avatar

Lock-Goblin-Gordon
Lock-Goblin-Gordon

Posts: 3699

Joined: Fri Oct 26, 2012 3:05 am

Location: Arizona, United States

Post Sun Nov 24, 2013 1:59 am

Re: More Toys from Snowyboy!

mech wrote:i can vouch for hintz's cutaways guys a pro with the mill! top guy to trade with too.

Any examples you would care to post?

Gordon
Just when you think you've learned it all, that is when you find you haven't learned anything yet.
<<

GWiens2001

User avatar

Lock-Goblin-Gordon
Lock-Goblin-Gordon

Posts: 3699

Joined: Fri Oct 26, 2012 3:05 am

Location: Arizona, United States

Post Mon Jun 29, 2020 1:54 pm

Re: More Toys from Snowyboy!

mech wrote:i can vouch for hintz's cutaways guys a pro with the mill! top guy to trade with too.


Long dead thread, but for those looking for hintz's cutaways... Snowyboy IS hintz. Also goes by the hand FrenchConnection_UK.

Gordon
Just when you think you've learned it all, that is when you find you haven't learned anything yet.
<<

Anarchy_won

User avatar

Active Member

Posts: 675

Joined: Sun Oct 27, 2013 5:27 pm

Location: Ontario, Canada

Post Mon Jun 29, 2020 7:05 pm

Re: More Toys from Snowyboy!

Love those locks. Snowboy/hintz is the reason I started making cutaways.
(17:44:28) HAL 9000 Sez: LockSport is full of children who throw fits because low priced low security products sold in discount department stores do not meet their arbitrary expectations.

Return to Cut-aways

Who is online

Users browsing this forum: CommonCrawl [Bot]

Don't forget to visit our sponsors for all of your lockpicking needs!
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Grop
"CA Black" theme designed by stsoftware