Page 1 of 1

Sargent Cutaway (LA Keyway) Video

PostPosted: Sat Oct 03, 2015 9:38 pm
by Anarchy_won
here is a video of a Sargent lock I made into a cutaway.

https://youtu.be/mEuDychtagY

Re: Sargent Cutaway (LA Keyway) Video

PostPosted: Sat Oct 03, 2015 10:55 pm
by davesnothere11
Nice to see the process. I am suprised you don't have to clamp it in place. It was just sitting in a cradle of sorts right?

Re: Sargent Cutaway (LA Keyway) Video

PostPosted: Sat Oct 03, 2015 11:02 pm
by Anarchy_won
no it is in a vise. the cradle is a 3D printed v block it sits on so the housing is square in the vise.

Re: Sargent Cutaway (LA Keyway) Video

PostPosted: Sun Oct 04, 2015 5:35 pm
by Oldfast
Enjoyed watching that! And actually rather relaxing :) Thanks

Re: Sargent Cutaway (LA Keyway) Video

PostPosted: Mon Oct 05, 2015 8:02 am
by Papa Gleb
Very much enjoyed. Thanks for posting and please do post more.

Re: Sargent Cutaway (LA Keyway) Video

PostPosted: Mon Oct 05, 2015 5:22 pm
by Anarchy_won
Thanks guy's, keep a eye on my youtube channel and expect more videos in the near future. ;)

The only problem is I don't have music playing in my shop when I am working now as the mic would pick that up over the shop sounds :(

Re: Sargent Cutaway (LA Keyway) Video

PostPosted: Tue Oct 06, 2015 4:56 pm
by Papa Gleb
honestly, sounds are the least important. What I would like better is better video quality but Im sure you already know that.

Re: Sargent Cutaway (LA Keyway) Video

PostPosted: Tue Oct 06, 2015 7:35 pm
by Anarchy_won
yeah the video is not the best quality but its not bad for a $10 flexible "endoscope" from ebay plugged into my old tablet.

Re: Sargent Cutaway (LA Keyway) Video

PostPosted: Wed Oct 07, 2015 7:19 am
by Papa Gleb
Lol in that case no its not bad at all

Re: Sargent Cutaway (LA Keyway) Video

PostPosted: Mon Oct 12, 2015 8:57 pm
by Anarchy_won
any recommendations on a better small camera? (ideally it would be a stand alone unit or it uses USB so I can plug it into my tablet to record ) I have a not so cheap (logitech) web cam but I found that it's always in my way when milling.