Familiar Face
Posts: 105
Joined: Tue Dec 31, 2013 11:40 pm
Location: Gowrie Junction, Queensland, Australia
Re: 3d printed key
The reproduction of a key from nothing more than an image. From Hux.
One thing I didnt mention is that is how I made this key. I looked at an Abloy key on the net and took some measurements from the lock and other keys so it wouldnt be hard to reproduce a working key from a photo.
There are a set number of pin lengths so the cut could be produced from a hi res photo. My Samsung phone has a 12 meg camera so I will try this soon.
One thing I didnt mention is that is how I made this key. I looked at an Abloy key on the net and took some measurements from the lock and other keys so it wouldnt be hard to reproduce a working key from a photo.
There are a set number of pin lengths so the cut could be produced from a hi res photo. My Samsung phone has a 12 meg camera so I will try this soon.
Aut viam inveniam aut ipse viam faciam
"I shall either find a way, or make a way myself."
“People who say it cannot be done should not interrupt those who are doing it.” ― George Bernard Shaw
"I shall either find a way, or make a way myself."
“People who say it cannot be done should not interrupt those who are doing it.” ― George Bernard Shaw