Key for the Lockwood V7
9 posts
• Page 1 of 1
Just wanted everyone to know that If you got a V7 from Rodmdx and are wanting keys a KW1 will fit if you file a bit of brass away.
You do not have the required permissions to view the files attached to this post.
Re: Key for the Lockwood V7
I also received mine from Rod, as promised. Shipping from Australia is a bit steep, but I think it's very worth it in this case.
I wonder if this will still work if any of the pin stacks have a very shallow bitting. Does the blank come close to the top of the keyway?
Excellent information, thank you!
That gives me some new work to do.
I wonder if this will still work if any of the pin stacks have a very shallow bitting. Does the blank come close to the top of the keyway?
Excellent information, thank you!
That gives me some new work to do.
Re: Key for the Lockwood V7
MBI wrote:Does the blank come close to the top of the keyway?
It does but because the V part at the top of the keyway is pretty small you have a good bit of room for very high and deep cuts.
I have a few more blanks so I am going to try and file them away on one side so you have an edge that would go into maybe the left side of the V but not the right side!
Re: Key for the Lockwood V7
Hey, whats the correct blank for these anyway??
I have been in the souls of many women, but I always end up on the soles of there shoes.
Re: Key for the Lockwood V7
the lockpickkid wrote:Hey, whats the correct blank for these anyway??
I can't find anything on the blank but I think (could be wrong) Rodmdx said that they are no longer making keys for the V7.
Re: Key for the Lockwood V7
Nice work discovering this trick. I will also soon receive some V7's from Rodney (Thanks mate!!!) and I will have to do this.
Re: Key for the Lockwood V7
The profile is VWR that is on the plug
lockwood made about 12 different blanks for these locks
lockwood made about 12 different blanks for these locks
Re: Key for the Lockwood V7
Blanks are made, but not sold at all to anyone outside the lockwood dealers network.
While no new V7 systems are installed old systems are still supported by the locksmiths and the factory.
While no new V7 systems are installed old systems are still supported by the locksmiths and the factory.
9 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users