.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

I have a Cole file cabinet with a locking door but no key. Yep, easy to pick and sure I could make a key after pulling the lock apart but what I really want to do is cut a key from code. I've never done it before and this silly cabinet seems to be the one to call to me.

That said, i am looking for the key code for a National lock stamped C5A. I say it is a National based on the look of the N on the back of the handle. It takes a O1122B blank. I believe I have the depth and space charts to cover this so am just looking for the code. Any help would be appreciated.

Just to show I am not after yellow cake uranium stashed in this high security device, here are a couple of pics.

44324

Thank you!

Thanks again! I was able to make a working key after 3 tries. My depths were fine but I had some trouble with getting the spacing right on the first two. I even subscribed to a code site so I can do some more playing with code cutting.