.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Reese padlock stamped with code 855K. I need depths for the key. Requires ILCO 1140G blank which I can not find. I am using filed down CCL blank and tring to impression it.
Failed 4 times now and getting tired of having to make a key blank fit and then impression until it breaks, bends, or I reach way too deep into the blank for each cut. I make a lot of brass dust but no working key yet.
My LockCodes and Instacode does not have the 885 K info.
Can anyone help? I'm glad this is just a hobby...I would starve otherwise.
Thanks..
Steve

those Reese blanks may be discontinued by Ilco. A couple suppliers show them in their catalog but none in stock.

Check this out on eBay :

https://www.ebay.com/itm/ILCO-ILC1140G/ ... SwgUFbbODK

There are 3 bags of 10 each.

Here you go. I might have some of those blanks. I'll check.

I have 10 of those blanks....Trade? Open to anything.

Thanks Newbie. I thought that was for 1 key and too much for me but 10 is great. I placed an order.

Good to hear from you again just1pick. Thanks so much for the s&d info. Now I will know what to aim for. I may still make a lot of brass dust but it should help a lot.
I ordered some blanks from the above ebay listing. Thank ou for the offer.

Always such nice folks on this site.
Steve

I'm glad I could help.

BTW, my name is 6275LA. I am, however, a newbie on this site...

I like the username the most common Sargent blank we cut!