FAQ  •  My feedback  •  Feedback
UKLockpickers.co.uk Lockpicking supplies such as Lockpicks, tools, and more! COMMANDOLOCK.COM Military grade padlock systems lockpickshop.com A source for lockpicking supplies such as lockpicks, locksmith tools, and more!

Help- Does anyone have capability to make trioving key

<<

MrPharmer2012

User avatar

Doctor... Contributor
Doctor... Contributor

Posts: 452

Joined: Tue Oct 11, 2011 12:10 am

Location: San Diego CA

Post Tue Feb 20, 2018 2:46 am

Help- Does anyone have capability to make trioving key


http://www.youtube.com/watch?v=BIvV1Fk7BHY
I have this lock picked it open unsure of how to tear down and find key blank and make a key, if i remove set screw and pull cylinder the top pins and springs will fall out how would i hold those in chamber and reinsert core? If i did this, please send me recommendations on how to get a key for this the side has a serial number on it can i order a key?
Image
<<

MrPharmer2012

User avatar

Doctor... Contributor
Doctor... Contributor

Posts: 452

Joined: Tue Oct 11, 2011 12:10 am

Location: San Diego CA

Post Tue Feb 20, 2018 3:02 am

Re: Help- Does anyone have capability to make trioving key

I can’t get pics to attach or the video link to work
Image
<<

Riyame

Keeper of the Bests / Supreme Overlord of Small Format Interchangeable Picking Nightmares

Posts: 2017

Joined: Sun Jul 24, 2011 5:16 pm

Location: Canada

Post Tue Feb 20, 2018 3:18 am

Re: Help- Does anyone have capability to make trioving key

Long time no see man, how is it going?

I should have fixed the youtube imbed for you, it can be wonky sometimes, and you can't link photobucket pics any more unless you pay them $00 a year so most of us use imgur.com now or upload them right to the site.
PhoneMan: I always knew I'd say something stupid and it would be someone's sig
macgng: i am an equal opportunity pervert
macgng: aww fuck thats goin in someone sig :-(

If life gives you melons, you might be dyslexic.
<<

MrPharmer2012

User avatar

Doctor... Contributor
Doctor... Contributor

Posts: 452

Joined: Tue Oct 11, 2011 12:10 am

Location: San Diego CA

Post Tue Feb 20, 2018 5:06 am

Re: Help- Does anyone have capability to make trioving key

Everything has been great been super busy but recently pulled some locks back out and getting the bug back, i am a little rusty but it is coming back, I love this site and have learned a lot from it over the years a lot of good guys on here
Image
<<

MrPharmer2012

User avatar

Doctor... Contributor
Doctor... Contributor

Posts: 452

Joined: Tue Oct 11, 2011 12:10 am

Location: San Diego CA

Post Tue Feb 20, 2018 5:08 am

Re: Help- Does anyone have capability to make trioving key

Riyame any idea on where i can get keyblanks or know where can get info on this or send it off for a key to be made?
Image
<<

Riyame

Keeper of the Bests / Supreme Overlord of Small Format Interchangeable Picking Nightmares

Posts: 2017

Joined: Sun Jul 24, 2011 5:16 pm

Location: Canada

Post Tue Feb 20, 2018 7:32 am

Re: Help- Does anyone have capability to make trioving key

Were these the ones that were in the big lot on ebay for cheap a year or 2 back? I am not sure if anybody has been able to get keys, I thought that it was a restricted keyway.

You would likely have better luck asking on an EU forum.
PhoneMan: I always knew I'd say something stupid and it would be someone's sig
macgng: i am an equal opportunity pervert
macgng: aww fuck thats goin in someone sig :-(

If life gives you melons, you might be dyslexic.
<<

MrPharmer2012

User avatar

Doctor... Contributor
Doctor... Contributor

Posts: 452

Joined: Tue Oct 11, 2011 12:10 am

Location: San Diego CA

Post Tue Feb 20, 2018 8:50 am

Re: Help- Does anyone have capability to make trioving key

Curiosity got to me I had to know what was in it I opened it up, now i will be tasked with reassembly somehow
You do not have the required permissions to view the files attached to this post.
Image
<<

MrPharmer2012

User avatar

Doctor... Contributor
Doctor... Contributor

Posts: 452

Joined: Tue Oct 11, 2011 12:10 am

Location: San Diego CA

Post Tue Feb 20, 2018 8:52 am

Re: Help- Does anyone have capability to make trioving key

Spools and barrels every chamber
You do not have the required permissions to view the files attached to this post.
Image
<<

femurat

User avatar

Prolific Poster

Posts: 895

Joined: Mon Mar 14, 2011 9:47 pm

Location: Italy

Post Tue Feb 20, 2018 10:41 am

Re: Help- Does anyone have capability to make trioving key

I see an interesting pins selection in that padlock. Lucky you, there are many master wafers, otherwise a "rusted" picker would have struggled quite a bit to open it.

Welcome back :)
An old post of mine that you'd like to read is missing pictures? PM me and I'll fix them.
<<

mdc5150

User avatar

Contributor
Contributor

Posts: 1067

Joined: Tue Jan 25, 2011 4:35 am

Post Tue Feb 20, 2018 12:10 pm

Re: Help- Does anyone have capability to make trioving key

20180220_050826.jpg
Is this the same keyway? If not can you send a clear pic of the keyway? I might be able to since I made one for my oval.
You do not have the required permissions to view the files attached to this post.
<<

MrPharmer2012

User avatar

Doctor... Contributor
Doctor... Contributor

Posts: 452

Joined: Tue Oct 11, 2011 12:10 am

Location: San Diego CA

Post Tue Feb 20, 2018 4:28 pm

Re: Help- Does anyone have capability to make trioving key

My keyway the top bends other way looks like, any suggestions for reassembly when if i get key made? Do the plugs on the side push all the way thru and are they reusable? Or do i have to pin from inside and use like the Peterson topload kit
You do not have the required permissions to view the files attached to this post.
Image
<<

MrPharmer2012

User avatar

Doctor... Contributor
Doctor... Contributor

Posts: 452

Joined: Tue Oct 11, 2011 12:10 am

Location: San Diego CA

Post Tue Feb 20, 2018 4:40 pm

Re: Help- Does anyone have capability to make trioving key

Here is a better keyway pic, what would be cool is to find someone with a mill and have this turned into a cutaway and on each one of the stacks drill and tap them with set screws to add to the fun so you could easily change pins out to make it more fun anyone with ideas for keys and or experience making a cutaway let me know just a few thoughts running in my head
You do not have the required permissions to view the files attached to this post.
Image
<<

MrPharmer2012

User avatar

Doctor... Contributor
Doctor... Contributor

Posts: 452

Joined: Tue Oct 11, 2011 12:10 am

Location: San Diego CA

Post Tue Feb 20, 2018 4:46 pm

Re: Help- Does anyone have capability to make trioving key

Image
<<

Riyame

Keeper of the Bests / Supreme Overlord of Small Format Interchangeable Picking Nightmares

Posts: 2017

Joined: Sun Jul 24, 2011 5:16 pm

Location: Canada

Post Tue Feb 20, 2018 8:04 pm

Re: Help- Does anyone have capability to make trioving key

Fixed your video link. Remove the S from the HTTPS and use the full youtube link instead of the shortened one.

Anarchy_won has a mill and makes cutaways but it usually takes times.

One way to reassemble it if possible is to get a thin piece of metal that fits into the bottom of the keyway. You then form it into a clip t hat bends up along the bottom of the lock and again to go along the side. This will be used to hold all the top pins into place. Then you slide in the plug upside down then turn it while slipping off the metal clip. Then you pull out the clip and reinstall the bit that holds the plug into place.
PhoneMan: I always knew I'd say something stupid and it would be someone's sig
macgng: i am an equal opportunity pervert
macgng: aww fuck thats goin in someone sig :-(

If life gives you melons, you might be dyslexic.
<<

lock-ed

Newbie

Posts: 17

Joined: Tue Jan 25, 2011 7:35 am

Location: Norway

Post Tue Feb 20, 2018 9:58 pm

Re: Help- Does anyone have capability to make trioving key

MrPharmer,
that is a restricted keyway. You will have trouble getting a key made, or obtaining a blank.

On the positive side,- yes the code on THIS padlock can be used to ID blank/cuts. However, you need to track down the locksmith that has the licence for your particular code.

Had it been the standard(508) profile, I could have sent you blanks straight away.

Sorry I couldn't help more, but good lock-luck! :salute:

Rgds,
Ed
Next

Return to Key Making

Who is online

Users browsing this forum: CommonCrawl [Bot]

Don't forget to visit our sponsors for all of your lockpicking needs!
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Grop
"CA Black" theme designed by stsoftware