UMS key kit
Posted: Wed Aug 16, 2017 9:52 pmThis is from a live auction I attended last month. The kits on Ebay that I've seen do not have the code book and some are missing tools.
http://imgur.com/a/yIaIo
http://imgur.com/a/yIaIo
.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!
A Discussion Forum For Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, Lockpicks, cutaways, and security. Simply The Best Lockpicking Forum Around!
http://keypicking.com/
UMS key kit
Page 1 of 1
Posted: Wed Aug 16, 2017 9:52 pmRe: UMS key kit
Posted: Wed Aug 16, 2017 10:19 pmI LOVE old tools like these! Have you tried to make a key with it? These I assume are for generating "original" keys? I take it those "brass" tools are for decoding locks? I would glue myself to the screen to see a video of this tool set in action! Great find.
Re: UMS key kit
Posted: Thu Aug 17, 2017 4:22 ammastersmith wrote:I take it those "brass" tools are for decoding locks? I would glue myself to the screen to see a video of this tool set in action! Great find.
The brass tools are likely to be like something similar to determinator or accu-reader.
The protrusion at the end of the tool gets stuck behind the wafers. The higher the protrusion , the shallower the cut.
The tools on top in the picture can then reset the wafer to get the brass tool out. The teeth on the tool show the position of the wafer.
Looks like a nice piece of kit to try and recreate in our workshop.
Thanks for sharing !!