Page 1 of 1
110V motor for HPC1200
Posted:
Thu Jul 21, 2016 6:47 pmby Pick-Fu
I was wondering if another one of the HPC machines have the same motor as the Blitz machine? Mine is a 12V and I really want to replace it at some point with a 110V one. If another machine has the same motor, then maybe I cam pick up a used one and swap out the motors and resell the other one.
Re: 110V motor for HPC1200
Posted:
Thu Jul 21, 2016 8:06 pmby Pick-Fu
Well all I was able to find is the part number for the motor CM-1080MA
I cant find any one selling one and nothing I can see on ay other HPC machine looks like the one on the 1200.
Its suggested price is $189.00 but where do you even go to order one? Not that I have money right now..
Re: 110V motor for HPC1200
Posted:
Fri Jul 22, 2016 6:26 amby jeffmoss26
I just checked my supplier, the same place your plastic lens came from, and they don't stock it. Most likely a special order item from HPC.
Re: 110V motor for HPC1200
Posted:
Fri Jul 22, 2016 9:56 amby Pick-Fu
Thank you so much for looking into that Jeff!!! And thank you again for ordering that lens..
I guess I will just deal with the 12v for now, This is just a hobby and its not like I am going to be code cutting keys all day long. I just dont like having the battery sitting on my bench..
Re: 110V motor for HPC1200
Posted:
Fri Jul 22, 2016 11:39 amby jeffmoss26
Here is a pic of one of the 1200 Blitz machines at work. That is a Grainger part number on the motor.
Re: 110V motor for HPC1200
Posted:
Fri Jul 22, 2016 12:44 pmby Pick-Fu
ROFLMAO... I went to grainger and started typing in the 9DGP3 and it came up with a list of 9GDP 1-9 Every number comes up with something with the exception of the 9DGP3 which it say there is no record... but it came up in the list
I also tried Taylor with no luck
Its just my luck Jeff
LOL, thanks for trying my friend
Re: 110V motor for HPC1200
Posted:
Sat Jul 23, 2016 11:56 amby Random
Pick-Fu wrote:ROFLMAO... I went to grainger and started typing in the 9DGP3 and it came up with a list of 9GDP 1-9 Every number comes up with something with the exception of the 9DGP3 which it say there is no record... but it came up in the list
I also tried Taylor with no luck
Its just my luck Jeff
LOL, thanks for trying my friend
It looks like a fairly small motor, like the ones of ac condensor fans. Pull the motor and take it to your nearest motor shop, He should be able to cross something with the same ratings. As long at the shaft size hp and rpm and case stlye are the same you'll be fine. I can run the numbers from the motor guy we use at work if you like and see if i can find a cross reference.
Re: 110V motor for HPC1200
Posted:
Sat Jul 23, 2016 12:16 pmby spuds