.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

I had a work order to gain access to these locks and make keys, but I'm having issues finding the blanks I need. These are wafer locks that came off a sliding glass cabinet door at a convenience store. I either need several blanks, or the manufacturer so I can replace the cylinder assembly (I'd prefer not to change the whole locks because everything is held together with rivets and the locks are difficult to get to.









Thanks for your help

Not Really A Good Photo Buy You May See What I'm missing


http://search.aol.com/aol/imageDetails? ... 5c2885fc9a

That is a Kenstan lock. Most likely a Y11. They usually impression ok.

mdc sounds pretty confident so I am taking a guess that he has some experience with these things. But I am pretty sure that is NOT a Y11 keyway. Looking at the pic I would guess that it is a Ilco 1054UN. KABA makes all sorts of aftermarket replacement stuff, if they saw a market they would surely have made a lock. My $.02, good luck! Mark

it looks like a 1054G keyway to me (the 1054G is a option in some kenstan plunger locks) here is the 2011 Kenstan Catalog http://www.lsamichigan.org/Tech/Kenstan_catalog.pdf

*EDIT* it's a Kenstan "B" keyway (denoted by the B stamped on the face of the lock. see page 20 of the PDF above) I have no idea what other key will work with it

And a 1054G is so close to a Y11 I've never had a Y11 not work in its place unless it was a L1054G.

Thanks for the help guys

I tried Y11 first, then several others and none worked

It does seem to be that B keyway. I'm ordering blanks and we'll see how it goes