Page 1 of 1

Master Padlock Codes Needed

PostPosted: Fri Aug 28, 2015 4:30 pm
by MrWizard
Would anyone happen to have the obscure bitting for either of these Master padlock code numbers? A5U565 or A5U587 ? Nothing found in my Reed books or older HPC software that I have. Locks are old 4 pin cylds 1K keyways.

Richard

Re: Master Padlock Codes Needed

PostPosted: Fri Aug 28, 2015 5:07 pm
by bitbuster
i can check my old Master padlock code books. it may be awhile.

Re: Master Padlock Codes Needed

PostPosted: Fri Aug 28, 2015 8:20 pm
by macgng
I found a master padlock series for U### but not A5U###.... this might be it, i dunno

  Code:
Code U587: Master padlock
Cuts are:      1    5    3    4
Blanks:        1K   Master


Code U565: Master padlock
Cuts are:      4    1    5    3
Blanks:        1K   Master


Here is D&S info:
  Code:
Spacing    Depth
.187      .210
.312      .256
.437      .194
.562      .225
       
Root:  .035     Angle: 90

Re: Master Padlock Codes Needed

PostPosted: Fri Aug 28, 2015 10:12 pm
by bitbuster
DSCI0103.JPG
i found what mac found in the blue book.

Re: Master Padlock Codes Needed

PostPosted: Fri Aug 28, 2015 11:16 pm
by MrWizard
I found one code on Reed index page that isn't either one I need showing the bitting in the right series. If you find a series that has bitting matching the one below we have a winner.

A5U725 cuts are 3564

Re: Master Padlock Codes Needed

PostPosted: Sat Aug 29, 2015 12:04 am
by jeffmoss26
Nothing in Instacode.

Re: Master Padlock Codes Needed

PostPosted: Sat Aug 29, 2015 1:13 am
by macgng
MrWizard wrote:I found one code on Reed index page that isn't either one I need showing the bitting in the right series. If you find a series that has bitting matching the one below we have a winner.

A5U725 cuts are 3564



nope i get " 6 2 5 2 " for U725


the search continues :-(

Re: Master Padlock Codes Needed

PostPosted: Sat Jan 28, 2017 10:28 pm
by grit1
Hey folks - can someone help me with a master key code? Looking for the bitting for 2852 on an M1 blank. My ancient version of Codesource has this series missing. Many thanks!

Re: Master Padlock Codes Needed

PostPosted: Sun Jan 29, 2017 2:46 am
by jeffmoss26
cuts are 3152

Re: Master Padlock Codes Needed

PostPosted: Sun Jan 29, 2017 3:22 am
by just1pick+open
jeffmoss26 wrote:cuts are 3152

I get 3153

Re: Master Padlock Codes Needed

PostPosted: Sun Jan 29, 2017 11:49 pm
by jeffmoss26
sorry - you are right
Image

Re: Master Padlock Codes Needed

PostPosted: Mon Jan 30, 2017 1:20 am
by grit1
Thank you!!