Page 3 of 3

Re: Requests for Lock Codes

PostPosted: Fri May 27, 2016 9:49 am
by 10ringo10
Heard these where on software now - mid to late 2014 New series Fastec fic CW401 TO CW434

There was a difference of opinion - on this as the full set was purchased and decode by eye on another site
in regards to the cuts being 3s or 4s ?? once decoded correct or not - no space or depth info or blank used
was mentioned lol

IE : CW 401 12422 or 12322

Re: Requests for Lock Codes

PostPosted: Fri May 27, 2016 11:48 am
by macgng
401 = 12322

Hope that answers your questions.

Re: Requests for Lock Codes

PostPosted: Fri May 27, 2016 12:16 pm
by 10ringo10
macgng wrote:401 = 12322

Hope that answers your questions.


Smashing - only printed them off today so will need to change the 4 depths to 3s on list -
so there is no 4 cuts on the series and code cw 421 was missing !
Reading on there site its a different lock cylinder - so guess its not same blank required as the CF-EF-HF series used
And S/D won,t be the same as old series
so Just need the new space and depth now - blank used macgng ..... cheers buddy

Re: Requests for Lock Codes

PostPosted: Fri May 27, 2016 12:51 pm
by macgng
If you wait a bit I can get you d&s info for the series when I get home, but I'm on my iPhone now.

Re: Requests for Lock Codes

PostPosted: Sat May 28, 2016 6:08 am
by 10ringo10
Thanks - got pm this morning mac
L@@ks to be same depth and space used as previous FIC codes used - was surprised at this
possible reason why they where not mentioned

Re: Requests for Lock Codes

PostPosted: Sat May 28, 2016 7:30 am
by macgng
sent you an email ;)

glad to help! ... just paying you back for all those Yale padlocks you looked up for me years ago :D

Re: Requests for Lock Codes

PostPosted: Sat May 28, 2016 2:41 pm
by 10ringo10
interesting - journey from the blank required on this lock

when I cross referenced this its the JMA fcs-1d - ilco 1681 a lot of good stuff on mysecurity pro on blank

Good one to stock ! if you have trailers - RV in your area or district or selling worldwide :D

thanks - mac

Re: Requests for Lock Codes

PostPosted: Tue Jul 03, 2018 10:38 pm
by castle 2
macgng wrote:Bump for anyone that didn't see this.... just renewed my subscription.

if anyone has blind codes i can look em up for ya... thanks, and if they work, donate to the forum :D



Do they have any information relating to ASSA / RUKO scd cylinders? I think they're 700s the Assas....

TL385752 is one of the codes on the cylinder itself...?

Re: Requests for Lock Codes

PostPosted: Tue Jul 03, 2018 11:07 pm
by macgng
nope, sorry.

Re: Requests for Lock Codes

PostPosted: Wed Jul 04, 2018 11:14 am
by Werewolf
I don't get many Assa's , but i've seen some that were stamped on the back with a direct code.
So if it is a 6 pin cylinder , 385752 may just be the cuts.
And the TL will indicate the key profile. But I can't find anything in Instacode or Silca software.

Edit: Börkey key blank 1524 1/2 / 3 fits a TL keyway for ASSA 600

Re: Requests for Lock Codes

PostPosted: Wed Jul 04, 2018 6:22 pm
by GWiens2001
Sezam code 43124

Gordon