.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Posted: **Mon Jan 12, 2015 6:37 pm**

I have a 747 w/o key that I picked and now need blanks. I also have a 748 that I'd like to have a second key for so will need a blank for it too.

I think the blank is 1041U for both locks.

If anyone can sell me about 5 of these blanks, please pm me with cost and we can see what we can work out.

Thanks for the help.....
Steve

Posted: **Mon Jan 12, 2015 8:05 pm**

1010U is not the right profile. You would actually need the reverse which is a Sargent R keyway, but is way too large for the American keyways.

Posted: **Mon Jan 12, 2015 8:41 pm**

I have used a file on regular American 6 pin blanks to make temporary keys to these locks. The correct blanks are a little on the pricey side I remember. I remember what I charged my customer at the time but I don't remember what our cost was.

Posted: **Tue Jan 13, 2015 7:32 am**

Thanks for the feedback.
I'll file some regular blanks I guess. I can get them at a local hardware.
Steve

.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

American key blank for 747/748 padlocks

American key blank for 747/748 padlocks

Re: American key blank for 747/748 padlocks

Re: American key blank for 747/748 padlocks

Re: American key blank for 747/748 padlocks